Tag Archives: pyrolox
Pyrolox 56FT Back Wash Valve Iron Manganese Sulfur Water Filter 1 cubic ft
Pyrolox 1 cubic feet 56FT Iron Manganese Sulfur Water Filter. Pyrolox 56FT Iron Manganese Sulfur Water Filter 1 CU FT OF MEDIA. FRP TANK 9 X 48. Pyrolox is a granular water filtration media used for the removal of hydrogen sulfide, iron and manganese. Through a natural chemical reaction, Pyrolox has the ability to help you produce clean, high-quality water. Pyrolox works because of a catalyst reaction whereby hydrogen sulfide, iron, and manganese are oxidized on the media. Daily backwashing then flushes trapped particulate from the filter bed. Pyrolox is a natural mineral form of manganese dioxide, making it an environmentally sound means of water filtration. Pyrolox is a highly effective media for the removal of iron, manganese and hydrogen sulfide. This robust product has proven highly successful in both point-of-entry, municipal and point-of-use applications. Though each treatment application is unique, there are certain general guidelines that need to be followed in order to realize the full benefits of Pyrolox as a permanent media. Backwashing As with any media, frequent and thorough back-washing is essential for long-term success with Pyrolox. The specific frequency of regular back-washing is dependent on water quality and application rate. A daily backwash at the appropriate rate is required to remove precipitated contaminants from the filter bed. Suggested back-wash rate: 25-30 gpm/sq. Oxidant Feed To maintain and further augment the long-term performance and removal capacity of the media, an oxidant feed of some type is strongly recommended. This will maintain the media and enhance removal capacity. Chlorine injection (options include chlorine, sodium hypochlorite, or calcium hypochlorite) immediately up stream of the filter feed is a simple way to meet this requirement. Other acceptable oxidants include air injection (oxygen is an oxidant), potassium permanganate, sodium permanganate, etc. Hydrogen peroxide is specifically prohibited for use as an oxidant. Bulk Density: 120 lbs. Specific Gravity: 3.8. Mesh Sizes: US 8×20. PH: 6.5-9.0. Bed Depth: Suggested depth 18 inches. Dependent on application and water quality. Underbed: Garnet #8, #8-#12. Other materials are also suitable but must keep media from migrating downward and be heavy enough to remain in place during backwash. Freeboard: 40% of bed depth min. Service flow rate: 5 gpm/sq. Why is a daily back-wash necessary when using Pyrolox? Back-washing removes contaminants on the surface of the media allowing for better performance. Since Pyrolox turns sulfur, iron, and manganese into a particulate, the solids begin to coat the surface of the media, weakening its oxidation capacity. Thorough back-washing keeps the surface of the media free to continue the oxidation process. Will Chlorine destroy the Pyrolox media? Actually, using chlorine or other oxidants is strongly recommended as they will extend the life of the media. How does Pyrolox differ from greensand and Birm®? Pyrolox is a pure granular form of manganese dioxide whereas greensand and Birm® are other minerals coated with manganese dioxide. This gives Pyrolox the ability to withstand regular backwashing and also provides a much greater oxidation capability than greensand or Birm®. Do I need to underbed Pyrolox? Without and underbed you will find the filter can have a poor backwash distribution. It is important to use an underbed that is heavier than Pyrolox to prevent migration into the media. 9″ x 48″ Structural mineral tank (Tank color may be Black, Blue, or Almond). High density Pyrolox media. Gravel bed for improved back flow wash. High gallon per minute flow rate. Standard 120v power supply. No chemicals to use, once set up, all automatic! WELL WATER TREATMENT PRODUCTS. Uncompromising Quality Water Systems. We have years of experience crafting our solutions for specific water sources in California. Our whole house water systems is designed to give you the best water quality from every faucet in your home. Setting ourselves apart from the competition, we use a three stage water system to clean, soften, and purify your water. A whole house filter, softener, and a reverse osmosis system. Track Page Views With. Auctiva’s FREE Counter. The item “Pyrolox 56FT Back Wash Valve Iron Manganese Sulfur Water Filter 1 cubic ft” is in sale since Thursday, February 25, 2010. This item is in the category “Home & Garden\Home Improvement\Plumbing & Fixtures\Pumps & Water Filtration Systems\Water Filters & Filtration Parts”. The seller is “dhillonnoni” and is located in North Hollywood, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
- Model: PYROLOX56FT
- Country/Region of Manufacture: United States
- Compatible Brand: AFW
- Filtration Method: Iron
- Type: WATER FILTER
- Compatible Model: PYROLOX56FT
- MPN: PYROLOX56FT
- Contaminant Removal: Iron Manganese Sulfur
- Country of Manufacture: United States
- Brand: Premier Water Systems
- Suitable For: Whole House
Whole House Water Filter System Pyrolox Iron Manganese Sulfur 10×54 USA
Pyrolox 56FT Iron Manganese Sulfur Water Filter. Pyrolox 56FT Iron Manganese Sulfur Water Filter 1.5 CU FT OF MEDIA TANK SIZE 10 X 54. Pyrolox is a granular water filtration media used for the removal of hydrogen sulfide, iron and manganese. Through a natural chemical reaction, Pyrolox has the ability to help you produce clean, high-quality water. Pyrolox works because of a catalyst reaction whereby hydrogen sulfide, iron, and manganese are oxidized on the media. Daily backwashing then flushes trapped particulate from the filter bed. Pyrolox is a natural mineral form of manganese dioxide, making it an environmentally sound means of water filtration. Pyrolox is a highly effective media for the removal of iron, manganese and hydrogen sulfide. This robust product has proven highly successful in both point-of-entry, municipal and point-of-use applications. Though each treatment application is unique, there are certain general guidelines that need to be followed in order to realize the full benefits of Pyrolox as a permanent media. Backwashing As with any media, frequent and thorough back-washing is essential for long-term success with Pyrolox. The specific frequency of regular back-washing is dependent on water quality and application rate. A daily backwash at the appropriate rate is required to remove precipitated contaminants from the filter bed. Suggested back-wash rate: 25-30 gpm/sq. Oxidant Feed To maintain and further augment the long-term performance and removal capacity of the media, an oxidant feed of some type is strongly recommended. This will maintain the media and enhance removal capacity. Chlorine injection (options include chlorine, sodium hypochlorite, or calcium hypochlorite) immediately up stream of the filter feed is a simple way to meet this requirement. Other acceptable oxidants include air injection (oxygen is an oxidant), potassium permanganate, sodium permanganate, etc. Hydrogen peroxide is specifically prohibited for use as an oxidant. Bulk Density: 120 lbs. Specific Gravity: 3.8. Mesh Sizes: US 8×20. PH: 6.5-9.0. Bed Depth: Suggested depth 18 inches. Dependent on application and water quality. Underbed: Garnet #8, #8-#12. Other materials are also suitable but must keep media from migrating downward and be heavy enough to remain in place during backwash. Freeboard: 40% of bed depth min. Service flow rate: 5 gpm/sq. Why is a daily back-wash necessary when using Pyrolox? Back-washing removes contaminants on the surface of the media allowing for better performance. Since Pyrolox turns sulfur, iron, and manganese into a particulate, the solids begin to coat the surface of the media, weakening its oxidation capacity. Thorough back-washing keeps the surface of the media free to continue the oxidation process. Will Chlorine destroy the Pyrolox media? Actually, using chlorine or other oxidants is strongly recommended as they will extend the life of the media. How does Pyrolox differ from greensand and Birm®? Pyrolox is a pure granular form of manganese dioxide whereas greensand and Birm® are other minerals coated with manganese dioxide. This gives Pyrolox the ability to withstand regular backwashing and also provides a much greater oxidation capability than greensand or Birm®. Do I need to underbed Pyrolox? Without and underbed you will find the filter can have a poor backwash distribution. It is important to use an underbed that is heavier than Pyrolox to prevent migration into the media. 10″ x 54″ Structural mineral tank. High density Pyrolox media. Gravel bed for improved back flow wash. High gallon per minute flow rate. Standard 120v power supply. No chemicals to use, once set up, all automatic! 56FT WITH 1cu ft. And 2 cu ft SYSTEMS. Uncompromising Quality Water Systems. We have years of experience crafting our solutions for specific water sources in California. Our whole house water systems is designed to give you the best water quality from every faucet in your home. Setting ourselves apart from the competition, we use a three stage water system to clean, soften, and purify your water. A whole house filter, softener, and a reverse osmosis system. Track Page Views With. Auctiva’s FREE Counter. The item “Whole House Water Filter System Pyrolox Iron Manganese Sulfur 10×54 USA” is in sale since Thursday, May 6, 2010. This item is in the category “Home & Garden\Home Improvement\Plumbing & Fixtures\Water Filters & Filtration Parts”. The seller is “dhillonnoni” and is located in North Hollywood, California. This item can be shipped to United States.
- Country of Manufacture: United States
- Model: PBW56FTIRON
- MPN: Does Not Apply
- Country/Region of Manufacture: United States
- Brand: Premier Water Systems
- Contaminants Filtered: Iron
- Replacement Filter Type: Whole House Filter
- Type: BACKWASH IRON REMOVAL FILTRATION
Whole House Water Filter System Pyrolox Iron Manganese Sulfur 0.5 cu. Ft
Pyrolox 1/2 cubic feet Timer back wash valve Iron Manganese Sulfur Water Filter. Pyrolox Timer backwash valve Iron Manganese Sulfur Water Filter 1/2 CU FT OF MEDIA. FRP TANK 8 X 35. Pyrolox is a granular water filtration media used for the removal of hydrogen sulfide, iron and manganese. Through a natural chemical reaction, Pyrolox has the ability to help you produce clean, high-quality water. Pyrolox works because of a catalyst reaction whereby hydrogen sulfide, iron, and manganese are oxidized on the media. Daily backwashing then flushes trapped particulate from the filter bed. Pyrolox is a natural mineral form of manganese dioxide, making it an environmentally sound means of water filtration. Pyrolox is a highly effective media for the removal of iron, manganese and hydrogen sulfide. This robust product has proven highly successful in both point-of-entry, municipal and point-of-use applications. Though each treatment application is unique, there are certain general guidelines that need to be followed in order to realize the full benefits of Pyrolox as a permanent media. Backwashing As with any media, frequent and thorough back-washing is essential for long-term success with Pyrolox. The specific frequency of regular back-washing is dependent on water quality and application rate. A daily backwash at the appropriate rate is required to remove precipitated contaminants from the filter bed. Suggested back-wash rate: 25-30 gpm/sq. Oxidant Feed To maintain and further augment the long-term performance and removal capacity of the media, an oxidant feed of some type is strongly recommended. This will maintain the media and enhance removal capacity. Chlorine injection (options include chlorine, sodium hypochlorite, or calcium hypochlorite) immediately up stream of the filter feed is a simple way to meet this requirement. Other acceptable oxidants include air injection (oxygen is an oxidant), potassium permanganate, sodium permanganate, etc. Hydrogen peroxide is specifically prohibited for use as an oxidant. Bulk Density: 120 lbs. Specific Gravity: 3.8. Mesh Sizes: US 8×20. PH: 6.5-9.0. Bed Depth: Suggested depth 18 inches. Dependent on application and water quality. Underbed: Garnet #8, #8-#12. Other materials are also suitable but must keep media from migrating downward and be heavy enough to remain in place during backwash. Freeboard: 40% of bed depth min. Service flow rate: 5 gpm/sq. Why is a daily back-wash necessary when using Pyrolox? Back-washing removes contaminants on the surface of the media allowing for better performance. Since Pyrolox turns sulfur, iron, and manganese into a particulate, the solids begin to coat the surface of the media, weakening its oxidation capacity. Thorough back-washing keeps the surface of the media free to continue the oxidation process. Will Chlorine destroy the Pyrolox media? Actually, using chlorine or other oxidants is strongly recommended as they will extend the life of the media. How does Pyrolox differ from greensand and Birm®? Pyrolox is a pure granular form of manganese dioxide whereas greensand and Birm® are other minerals coated with manganese dioxide. This gives Pyrolox the ability to withstand regular backwashing and also provides a much greater oxidation capability than greensand or Birm®. Do I need to underbed Pyrolox? Without and underbed you will find the filter can have a poor backwash distribution. It is important to use an underbed that is heavier than Pyrolox to prevent migration into the media. 8″ x 35″ Structural mineral tank. High density Pyrolox media. Gravel bed for improved back flow wash. High gallon per minute flow rate. Standard 120v power supply. No chemicals to use, once set up, all automatic! WELL WATER TREATMENT PRODUCTS. Uncompromising Quality Water Systems. We have years of experience crafting our solutions for specific water sources in California. Our whole house water systems is designed to give you the best water quality from every faucet in your home. Setting ourselves apart from the competition, we use a three stage water system to clean, soften, and purify your water. A whole house filter, softener, and a reverse osmosis system. Track Page Views With. Auctiva’s FREE Counter. The item “Whole House Water Filter System Pyrolox Iron Manganese Sulfur 0.5 cu. Ft” is in sale since Thursday, September 21, 2017. This item is in the category “Home & Garden\Home Improvement\Plumbing & Fixtures\Water Filters & Filtration Parts”. The seller is “dhillonnoni” and is located in North Hollywood, California. This item can be shipped to United States.
- Model: PYROLOX1-2Ft
- MPN: Does Not Apply
- Brand: Premier Water Systems
- Contaminants Filtered: Iron
- Replacement Filter Type: Whole House Filter
- Type: WATER FILTER
- Iron reduction: Manganese sulfur reduction
Fleck 2510 Pyrolox Iron, sulfur, manganese 0.5 cu ft whole house water filter
Sent With a Tracking No. Fleck 2510 Pyrolox Iron, sulfur, manganese 0.5 cu ft whole house water filter. Pyrolox Fleck 2510 Filter 0.5ft3For Iron, Sulfur, & Manganese Removal Complete System Includes Bypass ValveSay goodbye to smelly, bad tasting, stain causing water! This Pyrolox iron, sulfur and manganese filter will help you put these problems behind you. Iron is a big source of problems in water supplies, causing red discolored water, red or reddish-brown staining and sometimes giving the water a metallic taste. Sulfur is frequently associated with iron, and can easily be recognized by the rotten egg smell it gives the water. Manganese is sometimes found in water contaminated with iron or sulfur, and is usually identifiable by black, slimy staining and the smell of rotting vegetation. With this system you can get rid of all three problems with one single unit. Pyrolox media is a naturally mined ore that oxidizes the iron, sulfur, and manganese, allowing it to be trapped by the dense media bed. The density of the Pyrolox media also allows it to work well as a general sediment and turbidity filter. With no chemicals to add and an automatic backwashing control head, this system cuts maintenance down to a minimum! Using a #1 USA rated Fleck control head maintenance is simple. All you have to do is program the current time of day, set up the backwash cycle (at least once every 3 days) and your set to go! As with any iron filter, pH is a key factor, a minimum pH of 6.3 is required for efficient removal of these contaminates, if your pH is lower ask us about our pH neutralizing Calcite filters. Due to the density of the Pyrolox media please ensure you have an adequate flow rate for proper back flushing of the system. Features & Specs9″ x 48″ Structural USA tank (number 1 rated tank in the USA) 0.5 ft. 3 High density iron and sulfur removing Pyrolox media Gravel bed for equal water dispersion #1 rated Fleck 2510 control valve for automatic backwashing Bypass valve included, specify size 3/4″ or 1″ Calibrated flow control for proper backwashing Removes iron up to 10 ppm Removes sulfur (rotten egg odor) up to 4 ppm Removes manganese up to 4 ppm No chemicals to use, once set up, all automatic! Important Flow Rate Information. Service Flow Rate – The rate (in gallons per minute) at which the media can effectively treat your water. Service flow rates for Pyrolox are given in a range. The lower number is the manufacturers recommend rates, the higher number is actual rates that we have had successful treatment. Please note that most systems will allow a higher flow rate through them than the media can treat, so should your water demands exceed the systems capabilities some of the water will pass through untreated. NOTE: Higher contaminate levels are more effectively treated at lower flow rates. Thus, with higher contaminate levels you can expect lower treatable flow rates. Backwash Flow Rate – The minimum rate (in gallons per minute) that needs to be available for proper backwashing of the system. Backwash flow rates for Pyrolox systems are given in a range. The lower number is the manufacturers recommend rate, the higher number is the rate that has been successfully used. This is not a constant rate, your water source just needs to be capable of supplying the shown rate for backwash. NOTE: Higher contaminate levels require higher flow rates for backwash. Thus, with higher contaminate levels it is recommended to have the manufacturers recommended backwash rates. Please contact our experienced and professional staff with questions. They are eager to help!! The item “Fleck 2510 Pyrolox Iron, sulfur, manganese 0.5 cu ft whole house water filter” is in sale since Wednesday, January 17, 2018. This item is in the category “Home & Garden\Home Improvement\Plumbing & Fixtures\Other Home Plumbing & Fixtures”. The seller is “performa_softeners” and is located in Bartlett, Illinois. This item can be shipped to United States.
- Brand: afwfilters
- MPN: Does Not Apply
Fleck 2510 Pyrolox Iron, sulfur, manganese 0.5 cu ft whole house water filter
Sent With a Tracking No. Fleck 2510 Pyrolox Iron, sulfur, manganese 0.5 cu ft whole house water filter. This system is an All in one naturally air oxidizing filter media for Iron, Manganese, and Hydrogen Sulfide. The system includes the following. Fleck 2510 Automatic Backwashing Controller. 0.5 cubic ft of Pyrolox with gravel underbedding. 9 x 48 Black Mineral Tank. 1 inch Bypass Valve. Features of this system. Automatic Backwashing with simple program set-up. Removes up to 10ppm Iron (Ferrous and Ferric). Removes up to 4ppm Hydrogen Sulfide H2S (Rotten Egg Smell). Removes up t0 4ppm Manganese. Requires 6-10 GPM min for Backwash. 2.2-7 GPM Service Flow Rate. 1 inch bypass is the default if not specified by the customer and black tanks are the default if not specified by the customer. Please contact our experienced and professional staff with questions. They are eager to help!! This system is an All in One air injection filter for Iron, Manganese, and Hydrogen Sulfide. The item “Fleck 2510 Pyrolox Iron, sulfur, manganese 0.5 cu ft whole house water filter” is in sale since Monday, February 05, 2018. This item is in the category “Home & Garden\Home Improvement\Plumbing & Fixtures\Other Home Plumbing & Fixtures”. The seller is “performa_softeners” and is located in Bartlett, Illinois. This item can be shipped to United States.
- Country/Region of Manufacture: United States
- Brand: Fleck
- MPN: Pyrolox
- Model: 1.0 PX-2510-SXT
Fleck 2510 Pyrolox Iron, sulfur, manganese 0.5 cu ft whole house water filter
Pyrolox Fleck 2510 Filter 0.5ft. For Iron, Sulfur, & Manganese Removal Complete System Includes Bypass Valve. Say goodbye to smelly, bad tasting, stain causing water! This Pyrolox iron, sulfur and manganese filter will help you put these problems behind you. Iron is a big source of problems in water supplies, causing red discolored water, red or reddish-brown staining and sometimes giving the water a metallic taste. Sulfur is frequently associated with iron, and can easily be recognized by the rotten egg smell it gives the water. Manganese is sometimes found in water contaminated with iron or sulfur, and is usually identifiable by black, slimy staining and the smell of rotting vegetation. With this system you can get rid of all three problems with one single unit. Pyrolox media is a naturally mined ore that oxidizes the iron, sulfur, and manganese, allowing it to be trapped by the dense media bed. The density of the Pyrolox media also allows it to work well as a general sediment and turbidity filter. With no chemicals to add and an automatic backwashing control head, this system cuts maintenance down to a minimum! Using a #1 USA rated Fleck control head maintenance is simple. All you have to do is program the current time of day, set up the backwash cycle (at least once every 3 days) and your set to go! As with any iron filter, pH is a key factor, a minimum pH of 6.3 is required for efficient removal of these contaminates, if your pH is lower ask us about our pH neutralizing Calcite filters. Due to the density of the Pyrolox media please ensure you have an adequate flow rate for proper back flushing of the system. We are here to assist you and customize all of your specific needs. 9″ x 48″ Structural USA tank (number 1 rated tank in the USA) 0.5 ft. High density iron and sulfur removing Pyrolox media Gravel bed for equal water dispersion #1 rated Fleck 2510 control valve for automatic backwashing Bypass valve included, specify size 3/4″ or 1″ Calibrated flow control for proper backwashing Removes iron up to 10 ppm Removes sulfur (rotten egg odor) up to 4 ppm Removes manganese up to 4 ppm No chemicals to use, once set up, all automatic! Important Flow Rate Information. Service Flow Rate – The rate (in gallons per minute) at which the media can effectively treat your water. Service flow rates for Pyrolox are given in a range. The lower number is the manufacturers recommend rates, the higher number is actual rates that we have had successful treatment. Please note that most systems will allow a higher flow rate through them than the media can treat, so should your water demands exceed the systems capabilities some of the water will pass through untreated. NOTE: Higher contaminate levels are more effectively treated at lower flow rates. Thus, with higher contaminate levels you can expect lower treatable flow rates. Backwash Flow Rate – The minimum rate (in gallons per minute) that needs to be available for proper backwashing of the system. Backwash flow rates for Pyrolox systems are given in a range. The lower number is the manufacturers recommend rate, the higher number is the rate that has been successfully used. This is not a constant rate, your water source just needs to be capable of supplying the shown rate for backwash. NOTE: Higher contaminate levels require higher flow rates for backwash. Thus, with higher contaminate levels it is recommended to have the manufacturers recommended backwash rates. HI, AK and other provinces are additional and an invoice will be sent for the additional amount due. The item “Fleck 2510 Pyrolox Iron, sulfur, manganese 0.5 cu ft whole house water filter” is in sale since Sunday, September 25, 2011. This item is in the category “Home & Garden\Home Improvement\Plumbing & Fixtures\Other Home Plumbing & Fixtures”. The seller is “cleandrink” and is located in Pfeifer, Kansas. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
- Brand: afwfilters
- MPN: Does Not Apply