Pelican PC600 Premium 10 Gallon 4-Stage WHOLE HOUSE Water Filter with Pre-Filter. Up to 3 Bathrooms. ATTENTION PLEASE: Please, read carefully. The “main filter” stands almost 5 feet tall. The “pre-filter” about 1- 1/2 feet tall. THIS IS A BRAND NEW SYSTEM STILL IN ORIGINAL PACKAGING-UNOPENED BOXES. TAKEN OUT OF THE BOX OR. This whole house water filter system was a gift to me, yet it was inappropriate for my home’s requirements. ALL INFORMATION LISTED WAS TAKEN FROM THE COMPANY WEB-SITE. Sediment pre-filter system with mounting hardware. Pelican Carbon Series filter preloaded ready to install. Pelican Water (Pelican) warrants to the end user (customer) that its tanks, valves, in/out heads, bypasss, fittings and housings (Covered Items) will be free from defects in material and workmanship under normal use and service for the life of the system. The Pelican Carbon Series is guaranteed to reduce chlorine, and chloramine below minimum detection levels (MDL) for 5 years or 650,885 (PC600)/ 1,301,770 (PC1000) gallons. SPECS AND PRODUCT INFORMATION ON MODEL PC600. 8 GPM Service / 12 GPM Peak. Tank 1 Media (PC600). Every 5 years or 650,885 Gallons. How It Works – Pelican Premium Carbon Filtration System. Premium 4-Stage Whole House Water Filtration System. 5-Micron Pre-filter System – The sediment pre-filter system reduces sand, silt, sediment and debris in the supplied water down to 5 micron (20 times smaller than a human hair) in size. Routine replacement of this 5-micron sediment filter will increase the effectiveness and protect plumbing and appliances from excess sediment. With average use, each filter is effective for approximately 6-9 months. Stages 2 & 3. Catalytic Granular Activated Carbon Media (GAC) – Pelican utilizes a high-grade mesh blend of catalytic coconut shell based activated carbon in the Pelican Carbon Series Premium Whole House Water Filters. These media are designed to filter chlorine, chloramines, pesticides, herbicides, pharmaceuticals, industrial solvents and hundreds of other contaminants that may be present in your water. Pelican Media Guard – Copper and Zinc Oxidation Media (KDF-55) – We also include a patented bacteriostatic copper-zinc reduction oxidation media for the purpose of preventing and reducing the potential growth of bacteria and algae. COMPARE OUR SYSTEM TO OUR COMPETITORS. The large diameter of the tank holds a significant amount of water filtration carbon media, increasing the overall performance and lifespan of the filter. The replacement cost is a fraction of the cost of comparable products from competitors. Replacement is extremely easy. When it comes time to replace the filter, all you have to do is replace the media inside the tank. There is no plumbing required and no need to replace the entire tank, as there is with other whole house systems. Can you imagine spring like water coming through every faucet of your home? Thats what youll have when you use Pelican Waters Premium Whole House Water Filter System. Say goodbye to dry, itchy skin and unpleasant odors caused by the chemicals in your water, and hello to sparkling clean water that youll enjoy drinking. The Pelican Premium Water Systems are wrapped in premium stainless steel to ensure long life, durability and unsurpassed quality. He Pelican Carbon Series Whole House Water Filter Systems are specially designed as an Up-Flow System that does not require any special process or instructions for replacing the media. Other Down-Flow Systems on the market do not allow for the media replacement as an option because the homeowner would have to have special knowledge or tools to complete the task. Many water filtration experts agree that down-flow systems often have channeling issues in the media making them less effective in filtering out chemicals in the water because the water is unable to reach the unexpired media. Channeling is the process where small tunnels form in the media allowing water to flow in the same channel every time. Water always takes the path of least resistance. The Pelican Systems force the water in an Up-Flow direction up from the bottom of the tank in a swirling motion causing the carbon media to swirl. This motion allows the water to have maximum contact with the carbon media resulting in a very effective filtration process without the possibility of channeling. This is found to be the most effective design in whole house water filtration systems. It is important to understand how the carbon media inside the Pelican Carbon Series Systems works; Adsorption: the process by which matter (chemicals) adheres to the surface areas of a solid adsorbent material (carbon media). In layman’s terms the chemicals in your water are adsorbed into the carbon media on contact. The carbon media does not release any chemicals back into your water once they are adsorbed. We offer the replacement media as a more cost effective and environmentally friendly approach. When it comes time to replace the media, you are not throwing away a tank, fittings, or having to try and dispose of a complete system. Not to mention the cost of hiring a plumber to remove the old tank and install the new one. The media is the fuel for the system (it’s like the gas in your car). If you had to replace your car every time you ran out of gas that would be crazy, the same goes for the filtration system. The tanks and fittings are designed for this specific application. The media inside the tank is only part of the cost of a complete system therefore you cannot rate the effectiveness of the media based on the low cost to replace it. The Pelican Carbon Series Systems use an up-flow design and do not waste any water while filtering and softening/conditioning the water for your entire home. While other systems use a down-flow design requiring them to backwash once or twice a week wasting 100-300 gallons of water each time they backwash. The fact is that we cannot afford to waste one drop of water. Water is one the most important resources we have on earth. The Pelican Carbon Series Systems eliminates the need for an electronic head for backwashing because of its up-flow design. No moving parts means less maintenance and no service calls for damaged moving parts that render the system unable to filter your water. Pelican Carbon Series Whole House Water Filter System is a low-maintenance, easy to install system. Highlights of using this product include. Certified Performance – Removes 97% Chlorine up to 1.301mil Gallons. Softer skin and hair. Great tasting coffee and tea. Better than bottled water from. Tap in your home. Bacterial Static Media – inhibits bacterial growth. Installation (inside or outside). On tank and parts. Pelican Waters Premium Whole House Water Filter is a deluxe, high-capacity, virtually maintenance-free system that is easily installed in any home. It has a 600,000-1,000,000-gallon, 5-year capacity, which is the best value on any whole house water filter system in America! The replacement cost is a fraction of the cost of the competitors. The large diameter of the tank holds a significant amount of water filtration carbon media increasing the overall performance and lifespan. When it comes time to replace the filter all you have to do is replace the media inside the tank, no plumbing required and no need to replace the entire tank like that of other whole house systems. THIS IS AN UNOPENED NEW PRODUCT NEVER INSTALLED OR TAKEN OUT OF THE BOX. If you have any further questions. Please do not hesitate to ask. The item “Pelican PC600 Premium 10 Gallon 4-Stage Whole House Water Filter with Pre-Filter” is in sale since Saturday, August 4, 2018. This item is in the category “Home & Garden\Home Improvement\Plumbing & Fixtures\Water Filters”. The seller is “jwal5346″ and is located in Greenwood, South Carolina. This item can be shipped to United States.
- Brand: Pelican
- Custom Bundle: No
- Non-Domestic Product: No
- Model: PC600
- Applicable Regions: Greenwood, South Carolina
- Modified Item: No
- Type: 4-Stage Whole House 1-3 Bathrooms
- Country/Region of Manufacture: United States