Tag Archives: housings
Whole House-RV Water System 3 Stage2 Sets Of Filters Clear Housings 3/4
This 3-stage whole house water filter system is perfect for removing chlorine taste and odor from your drinking water. The system is compatible with 10″x2.5″ filters and includes clear housings for easy visibility. Made of polypropylene material, the filters use UDF, PP, CTO or GAC filtration methods to ensure clean and safe drinking water. The filter cartridges for commercial, recreational vehicle, and household use. The item weighs 9 lbs, and its dimensions are 5.5″ in depth, 14.5″ in height, and 15 3/4 in width. This water filter system is a great investment for anyone who wants to enjoy clean and refreshing drinking water. Important: Take off filter wrap before first use from the housing! Flash system for 1-2 minutes before use.
3 Stage High Quality RV Water Filter System Clear Housings 3/4 Hose Fitting’s
This high-quality RV water filter system is designed to provide clean and filtered water for your commercial or household needs. The system includes three filtration stages that remove chlorine taste and odor, ensuring that you get pure and refreshing water every time. The clear housing and 3/4 hose fittings make it easy to install and maintain your system. With a capacity of six-month filter cartridges, this system is suitable for both commercial and household use. It is compatible with standard 10″ x 2.5″whole house and recreational vehicle filters. IMPORTANT: TAKE WRAP FROM FILTER CARTRIDGES OFF BEFORE FIRST USE! Run water for 1-2 minutes with new filters.
RV Water Filter System 3 Stage Crystal Clear Housings 3/4 Garden Hose Fittings
RV Water Filter System that’s Economical with 3 Stage’s for extra clean tasting water. This system flows Left to Right. High Flow Rate and Outstanding Burst limit pressure of above 360+ PSI. This system lets the owner see what’s going on in their water. (What’s in the Box:). 3 Stage Water Filter System. 1 x Steel Hanging Bracket. 3 x White Connected Filter Heads 3/4 Threaded Ports. 2 x 3/4 Threaded Filter Head Fittings. 3 x Crystal Clear Filter Housings. 1 x Sediment Filter. 1 x UDF Carbon Filter. 1 x CTO Carbon Filter. 1 x Housing Wrench. 1 x 3/4 Male Hose Fitting. 1 x 3/4 Spinning Female Hose Fitting.
3-Stage Whole House Water Filter System 20×4.5 Big Blue Housings CTO 150000 Gal
SimPure SPWH-3S 20″ x 4.5″ 3 Stage Big Blue Whole House Water Filtration System (1 Inlet/Outlet Port) with Big Housings & Pressure Gauges – GAC Filter, Carbon Block, Sediment Filter Cartridges – Whole Home Water Filters Portable Steal Frame. The SimPure SPWH-3S is a 3 Stage Whole House Filtration System(PP Sediment + GAC + CTO). 1st filter (PP sediment filter) can remove dirt, silt, sand, rust and scale particles. The 2nd-stage filter (GAC granulated activated carbon filter) can remove chlorine, chloramine, VOCs and etc. The 3rd- filter(CTO carbon block filter) can remove chlorine, chloramine, VOCs, bad taste and odor. Extend the life of your dishwasher and other appliances, and reduce cost of the energy. With our instruction you can use and install SPWH-3S 3-stage whole house water filtration system with no problem. Housing Bracket so You can choose mounted or unmounted installation. Pressure gauges help to monitoring your system and to know which filter you need to change and when. Remove the filters easily by the Pressure Release Buttons. The black cap has. 1 female National Pipe Thread Taper (NPT). Threaded input and output connections, DOUBLE O-ring to ensure watertight seal. Our 3-Stage water filter system consists of two NSF standard, the 1-stage clear PP housing allows you to monitor the filter cartridge usage at anytime, anywhere, making it more convenient than traditional blue filter housings. They are made of reinforced polypropylene for strength and resistance. And we’ve improved the thickness and durability of the filter bottles. You can confidently use it as a pre-filter for municipal or well water sources. Longer Lifetime: – The carbon filter has a lifetime of. While the sediment filter&GAC filter can last for. The duration depends on your water quality. With a 5? M filter pore size, it effectively removes sediment, rust, dust, and large impurities from the water, reducing odors, discoloration, and chlorine, resulting in improved taste. To ensure water quality and extend product lifespan, we recommend a water pressure of 25-90 psi and a temperature range of 41-100°F. This SPWH-3S water filtration system connects directly to your home’s main water supply and fits standard American plumbing with 1 NPT inlet and outlet. It comes with a installation and maintenance guide. And It Is Easy to Replace Water Filter Cartridges: All SimPure Water whole house water filter replacement cartridges are designed for quick and easy replacement to keep your system up and running. The SimPure SPWH-3S Water Whole Home Water Filtration Systems is constructed with standing stainless-steel frames for long term durability and quality. Our 3-stage whole house system offering. Up to 150,000 gallons. Of clean water for a year for your family, it’s built for longevity. Features easy-to-change cartridges, transparent sediment housing, and pressure gauges. Enjoy benefits like no wastewater, consistent water pressure, chlorine-free showers, cleaner plumbing, and longer appliance life. Stage 1: PP Sediment Filter. Remove dirt, silt, sand, rust and scale particles, etc. Stage 2: GAC Filter. Remove chlorine, chloramine, VOCs, etc. Stage 3: CTO Filter. Remove chlorine, chloramine, VOCs, bad taste and odor, etc. Double O-Ring ensure watertight seal. Three accessible pressure release buttons for easy filter change. Three pressure gauges: Monitor your system’s performance, know which filters you need to change and when to change them. Standard 1 female NPT thread connections and long high efficiency housings for easy adaptability and high flow. Material: 100% food-grade ABS + Metal + Stainless Steel. Filter Size: 20 4.5 Inch. Filter Life (Months): 6 Month. Flow Rate (GPM): 15 GPM. Inlet/outlet Connection: 1 female NPT thread. Temperature Range: 41-100? (5-38?). Pressure Range: 25 – 90 psi. 1x SPWH-3S assembled housing kit with bracket. 2x Plastic Expansion Nail. 6x Installed O-rings (2 in each housing). 1x Punch Positioning Sticker. Q: Leaks between filter head and filter bowl of housing? A1: Tap water pressure is too high; make sure it is below 90psi (620kpa). If too high, fit a pressure regulator. A2: The O-ring may not be in place. Clean and lubricate O ring with silicone grease. Also, clean the groove where the O-ring sits. Replace O-ring in the groove above threads. Screw the bowl back on the filter head securely by hand, then use the wrench to fit it snugly. Do not over tighten. Q: Leaks on inlet/outlet connections? A1: Wrap the Teflon tape around pipe threads of each fitting in a clockwise direction, add more tape as necessary for the correct seal. A2: Brass fittings may require to tighten ½-turn with a wrench. Q: Leaks from the pressure release button? A: The pressure release button has a screw under the bracket. Simply tighten that screw and the leaking should stop. Q: Water Pressure is slowing after some time? A: Recommended changing the cartridges every 6-12 months depending on the amount of contaminants present in the feed water supply. If the system has been working correctly and the water pressure is slowing, it may be time to change the filter cartridge element. Q: Water Pressure is slowing immediately after installation when using a Carbon Cartridge? A1: Make sure the plastic wrapper around the filter has been removed. Check the filter cartridge has not been installed incorrectly, especially the GAC filter, please look at the picture, this is the botttom side of the GAC filter. A2: Bathtubs, utility sinks, garden hoses, showers, or anything considered high-flow should be avoided for the first 72 hours. Any high-flow situation within the first 72 hours may cause a temporary carbon blockage. To clear the blockage, turn off any running water for at least 10 minutes and resume using water at low or regular flow rates. Q: Water appears cloudy and grey. A: The water may appear cloudy or grey for the first 3-5 days after installation due to the tiny air bubbles being purged from the filters and extra carbon dust in the water. (depending on the filter cartridge being used) To solve this problem, please flush the whole system for about 10 minutes after you install it, then close the faucet and wait for one hour. And repeat the steps until the output water is clean.
3 Stage High Quality RV Water Filter System Clear Housings 3/4 Hose Fitting’s
RV Water Filter System that’s Economical with 3 Stage’s for extra clean tasting water. This system flows Left to Right. High Flow Rate and Outstanding Burst limit pressure of above 360+ PSI. This system lets the customer see what’s going on in their water. Yes, it’s clear. (What’s in the Box:). 3 Stage Water Filter System. 1 x Steel Hanging Bracket. 3 x White Connected Filter Heads 3/4 Threaded Ports. 2 x 3/4 Threaded Filter Head Fittings. 3 x Clear Filter Housings. 1 x Sediment Filter. 1 x UDF Carbon Filter. 1 x CTO Carbon Filter. 1 x Housing Wrench. 1 x 3/4 Male Hose Fitting. 1 x 3/4 Spinning Female Hose Fitting. 1 x Roll of Teflon Tape. 1 x Package of Bracket Hanging Screws. This RV System Cleans the water that enter’s your Recreational Vehicle. 1st stage: 10 Premium PP Polypropylene. 1 Micron sediment filter. Removes dust, dirt, silt, sand, Iron, rust and scale particles in the filter and extends the life of the system. 2nd stage: 10 Premium UDF/GAC Granular Activated Carbon. 5 Micron Filter removes chlorine, Sulfur, radon, VOCs, Pesticide’s and other common chemicals. This filter also removes cloudiness, offensive odors, colors and improves taste. 3rd stage: 10 Premium CTO Carbon Block. 5 Micron Filter removes chlorine, Sulfur, radon, VOCS, insecticides, pesticides, industrial solvents and improves taste. Working pressure: 20 to 125 psi water pressure. Clear Housing design that accepts standard 10″ x 2.5″ filter cartridges. Made to NSF Standards. Just unwrap the filters and reinstall in housings. This water filter system is not returnable if system has been used.
3 Stage 20 Big Blue Housings Whole House System+Spin Down Sediment Water Filter
SimPure SPWH-3S 20″ x 4.5″ 3 Stage Big Blue Whole House Water Filtration System (1 Inlet/Outlet Port) with Big Housings & Pressure Gauges – Spin Down Sediment Filter – Sediment Filter Cartridges, GAC Filter, Carbon Block – Whole Home Water Filters Portable Steal Frame. The SimPure SPWH-3S is a 3 Stage Whole House Filtration System(PP Sediment + GAC + CTO). 1st filter (PP sediment filter) can remove dirt, silt, sand, rust and scale particles. The 2nd-stage filter (GAC granulated activated carbon filter) can remove chlorine, chloramine, VOCs and etc. The 3rd- filter(CTO carbon block filter) can remove chlorine, chloramine, VOCs, bad taste and odor. Extend the life of your dishwasher and other appliances, and reduce cost of the energy. Spin Down Sediment Pre-filter: – With SimPure Whole House Spin Down Sediment Pre-filter, you can have peace of mind that it can purify the water coming into your home. As the filter can keep the particles out of the pipes and plumbing fixtures, you don’t also need to spend on heavy repairs and parts replacements. It means less maintenance on your part. And it can also provide positive protection for the downstream pipeline, water purifier, water heater, wall hung gas boiler, wash machine, shower, and other terminal water equipment. This filter system works with Whole-house Water Filtration Systems, Undersink Water Filtration Systems, RO Systems. Including with SimPure DB10/DB20/DB1025, Culligan(WH-HD200-C, HD-950A, HF-360A), Pen-tek 10 BB filter housings, APEC HBB-10, DuPont WFPF13003B, GE GXWH20S, etc. The Whole House Water Filter is supplied with 1″ Male NPT, 3/4″ Female NPT and 3/4 Male NPT. It is suitable for ANY THREADED CONNECTOR with 1″ Female NPT or 3/4″ Male NPT or 3/4 Female NPT. Including an extra 200? M filter element for free. 40? M filter will capture most particulates, it’s best suited for use on Municipal (tap) or City water. If using it on Well, Lake feedwater, you can replace it with the 200? M filter element. Otherwise it may require more frequent flushing to remove the build-up of particulates due to the fine filter mesh used. Features: 4 Stage Filtration. Stage 1: Spin Down Sediment Pre-filter. Keep the particles out of the pipes and plumbing fixtures. Stage 2: PP Sediment Filter. Remove dirt, silt, sand, rust and scale particles, etc. Stage 3: GAC Filter. Remove chlorine, chloramine, VOCs, etc. Stage 4: CTO Filter. Remove chlorine, chloramine, VOCs, bad taste and odor, etc – Double O-Ring ensure watertight seal – Three accessible pressure release buttons for easy filter change – Three pressure gauges: Monitor your system’s performance, know which filters you need to change and when to change them – Standard 1 female NPT thread connections and long high efficiency housings for easy adaptability and high flow. With our instruction you can use and install SPWH-3S 3-stage whole house water filtration system with no problem. Housing Bracket so You can choose mounted or unmounted installation. Pressure gauges help to monitoring your system and to know which filter you need to change and when. Remove the filters easily by the Pressure Release Buttons. The black cap has. 1 female National Pipe Thread Taper (NPT). Threaded input and output connections, DOUBLE O-ring to ensure watertight seal. Our 3-stage whole house system offering. Up to 150,000 gallons. Of clean water for a year for your family, it’s built for longevity. Features easy-to-change cartridges, transparent sediment housing, and pressure gauges. Enjoy benefits like no wastewater, consistent water pressure, chlorine-free showers, cleaner plumbing, and longer appliance life. Our 3-Stage water filter system consists of two NSF standard, the 1-stage clear PP housing allows you to monitor the filter cartridge usage at anytime, anywhere, making it more convenient than traditional blue filter housings. They are made of reinforced polypropylene for strength and resistance. And we’ve improved the thickness and durability of the filter bottles. You can confidently use it as a pre-filter for municipal or well water sources. Longer Lifetime: – The carbon filter has a lifetime of. While the sediment filter&GAC filter can last for. The duration depends on your water quality. With a 5? M filter pore size, it effectively removes sediment, rust, dust, and large impurities from the water, reducing odors, discoloration, and chlorine, resulting in improved taste. To ensure water quality and extend product lifespan, we recommend a water pressure of 25-90 psi and a temperature range of 41-100°F. This SPWH-3S water filtration system connects directly to your home’s main water supply and fits standard American plumbing with 1 NPT inlet and outlet. It comes with a installation and maintenance guide. And It Is Easy to Replace Water Filter Cartridges: All SimPure Water whole house water filter replacement cartridges are designed for quick and easy replacement to keep your system up and running. The SimPure SPWH-3S Water Whole Home Water Filtration Systems is constructed with standing stainless-steel frames for long term durability and quality. PP+GAC+CTO 20″X4.5″ 3-Stage Filter: – As the original replacement filter set for the SimPure SPWH-3S, they also fit 3 stage water filter systems and clean or blue big 20 housings including iSpring WGB32B, WGB22B WGB12B, HB28B, BBFS-222, WH300SCGS, Geek-Pure BB-20T, BB-20B, 150233, 166201, etc. Material: 100% food-grade ABS + Metal + Stainless Steel. Filter Size: 20 4.5 Inch. Filter Life (Months): 6 Month. Flow Rate (GPM): 15 GPM. Inlet/outlet Connection: 1 female NPT thread. Temperature Range: 41-100? (5-38?). Pressure Range: 25 – 90 psi. 1x SPWH-3S assembled housing kit with bracket 1x Spin Down Sediment Pre-filter. (PP sediment+GAC+CTO filters) 1x Wrench 2x Screws 2x Plastic Expansion Nail 6x Installed O-rings (2 in each housing) 2x Teflon Tapes 3x Pressure Gauges 1x Punch Positioning Sticker. Extra 3 Set Filters. 3x 20″x4.5″ PP Fillters 3x 20″x4.5″ GAC Fillters 3x 20″x4.5″ CTO Fillters. Q: Leaks between filter head and filter bowl of housing? A1: Tap water pressure is too high; make sure it is below 90psi (620kpa). If too high, fit a pressure regulator. A2: The O-ring may not be in place. Clean and lubricate O ring with silicone grease. Also, clean the groove where the O-ring sits. Replace O-ring in the groove above threads. Screw the bowl back on the filter head securely by hand, then use the wrench to fit it snugly. Do not over tighten. Q: Leaks on inlet/outlet connections? A1: Wrap the Teflon tape around pipe threads of each fitting in a clockwise direction, add more tape as necessary for the correct seal. A2: Brass fittings may require to tighten ½-turn with a wrench. Q: Leaks from the pressure release button? A: The pressure release button has a screw under the bracket. Simply tighten that screw and the leaking should stop. Q: Water Pressure is slowing after some time? A: Recommended changing the cartridges every 6-12 months depending on the amount of contaminants present in the feed water supply. If the system has been working correctly and the water pressure is slowing, it may be time to change the filter cartridge element. Q: Water Pressure is slowing immediately after installation when using a Carbon Cartridge? A1: Make sure the plastic wrapper around the filter has been removed. Check the filter cartridge has not been installed incorrectly, especially the GAC filter, please look at the picture, this is the botttom side of the GAC filter. A2: Bathtubs, utility sinks, garden hoses, showers, or anything considered high-flow should be avoided for the first 72 hours. Any high-flow situation within the first 72 hours may cause a temporary carbon blockage. To clear the blockage, turn off any running water for at least 10 minutes and resume using water at low or regular flow rates. Q: Water appears cloudy and grey. A: The water may appear cloudy or grey for the first 3-5 days after installation due to the tiny air bubbles being purged from the filters and extra carbon dust in the water. (depending on the filter cartridge being used) To solve this problem, please flush the whole system for about 10 minutes after you install it, then close the faucet and wait for one hour. And repeat the steps until the output water is clean.
SimPure 2-Stage Whole House Water Filter System 10×4.5 Big Blue Clear Housings
SimPure 10″ x 4.5″ 2 Stage Whole House Water Filtration System (1 Inlet/Outlet Port) with Big Housings & Pressure Relief Valve- GAC Filter, Carbon Block, Sediment Filter Cartridges – Remove Silt, Sand, Rust, Dirt, Chlorine, Taste & Odors, Iron, Lead – Whole Home/Pool/Well/Farm Water Filters Portable Steal Frame – with Spin Down Sediment Pre-filter (40micron / 200micron). Spin Down Sediment Pre-filter: – With SimPure Whole House Spin Down Sediment Pre-filter, you can have peace of mind that it can purify the water coming into your home. As the filter can keep the particles out of the pipes and plumbing fixtures, you don’t also need to spend on heavy repairs and parts replacements. It means less maintenance on your part. And it can also provide positive protection for the downstream pipeline, water purifier, water heater, wall hung gas boiler, wash machine, shower, and other terminal water equipment. This filter system works with Whole-house Water Filtration Systems, Undersink Water Filtration Systems, RO Systems. Including with SimPure DB10/DB20/DB1025, Culligan(WH-HD200-C, HD-950A, HF-360A), Pen-tek 10 BB filter housings, APEC HBB-10, DuPont WFPF13003B, GE GXWH20S, etc. The Whole House Water Filter is supplied with 1″ Male NPT, 3/4″ Female NPT and 3/4 Male NPT. It is suitable for ANY THREADED CONNECTOR with 1″ Female NPT or 3/4″ Male NPT or 3/4 Female NPT. Including an extra 200? M filter element for free. 40? M filter will capture most particulates, it’s best suited for use on Municipal (tap) or City water. If using it on Well, Lake feedwater, you can replace it with the 200? M filter element. Otherwise it may require more frequent flushing to remove the build-up of particulates due to the fine filter mesh used. The SimPure DB10C is a 2 Stage Whole House Filtration System(PP Sediment + CTO). 1st filter (PP sediment filter) can remove dirt, silt, sand, rust and scale particles. The 2nd- filter(CTO carbon block filter) can remove chlorine, chloramine, VOCs, bad taste and odor. Extend the life of your dishwasher and other appliances, and reduce cost of the energy. We use 2×2 O-Ring+brass fittings, it effectively reduces the risk of leaks and drips. Each filter bottle features a dual O-ring design for a tighter seal at the connection points. Additionally, we’ve added a rubber gasket at the top of the filter cartridge. What’s more, we’ve upgraded the material at the connection points, replacing plastic with brass fittings. Clear Housing is convenient to indicate and track of your filter life. Enjoy better water from every tap and every appliance in the whole house. With our instruction you can use and install 2-stage whole house water filtration system with no problem. Housing Bracket so You can choose mounted or unmounted installation. Clear Housing help you to know which filter and when you need to change. Remove the filters easily by the Pressure Release Buttons. The black cap has 1 female National Pipe Thread Taper (NPT) threaded input and output connections, DOUBLE O-ring to ensure watertight seal. 5 replaceable whole house water filters can provide up to a full year of clean water(up to 100, 000 gallons) for a family of four. 1-inch inlet and outlet ports allow fast water flow with less pressure loss. Fine PP sediment filter and premium quality CTO filter not only bring clean and fresh water to every faucet in your house, but also help prolong the lives of your water-using appliances and protect plumbing from sediment and scale buildup. This SimPure 2-stage water filtration system connects directly to your home’s main water supply and fits standard American plumbing with 1 NPT inlet and outlet. It comes with a installation and maintenance guide. And It Is Easy to Replace Water Filter Cartridges: All SimPure Water whole house water filter replacement cartridges are designed for quick and easy replacement to keep your system up and running. The SimPure 2-Stage Water Whole Home Water Filtration Systems is constructed with standing stainless-steel frames for long term durability and quality. Our 2-stage filter housing consists of two NSF standard transparent, they are made of reinforced polypropylene for strength and resistance to chemicals. Furthermore, we’ve improved the quality of the filter bottles by increasing their thickness and durability. You can confidently use it as a pre-filter for municipal or well water sources. The lifespan of carbon filter is 3-6 months, while the sediment filter can last for 6-12 months. The specific duration depends on your water quality. With a 5 micron filter pore size, it effectively removes sediment, rust, dust, and large impurities from the water, reducing odors, discoloration, and chlorine, resulting in improved taste. To ensure water quality and extend product lifespan, we recommend a water pressure of 25-90 psi and a temperature range of 41-100°F(5-38?). Stage 1: PP Sediment Filter. Remove dirt, silt, sand, rust and scale particles, etc. Stage 2: CTO Filter. Remove chlorine, chloramine, VOCs, bad taste and odor, etc. Double O-Ring ensure watertight seal. Three accessible pressure release buttons for easy filter change. Big Clear Housing let you know when to replace the filters. The pressure relief Valve: Let you replace the filter cartridges easily Standard 1 female NPT thread connections and long high efficiency housings for easy adaptability and high flow. Material: 100% food-grade ABS + Metal + Stainless Steel. Filter Size: 10 4.5 Inch. Filter Life (Months): 6-12 Month. Flow Rate (GPM): 15 GPM. Inlet/outlet Connection: 1 female NPT thread. Temperature Range: 41-100? (5-38?). Pressure Range: 25 – 90 psi. DB10C Water Filter System with all accessories. 2x Installed Filters (10″x4.5″ PP sediment+CTO filters). 13x Extra Set Filters. DC5P Spin Down Pre-Filter System Set. Not all of the items are included in the package, please choose the model you need in the selection. Q:Leaks between filter head and filter bowl of housing. A1: Tap water pressure is too high; make sure it is below 90psi (620kpa). If too high, fit a pressure regulator. The O-ring may not be in place. A2: O-ring with silicone grease. Also, clean the groove where the O-ring sits. Replace O-ring in the groove above threads. Screw the bowl back on the filter head securely by hand, then use the wrench to fit it snugly. Do not over tighten. Q: Leaks on inlet/outlet connections. A1: Wrap the Teflon tape around pipe threads of each fitting in a clockwise direction, add more tape as necessary for the correct seal. A2: Brass fittings may require to tighten ½-turn with a wrench. Q: Leaks from the pressure release button. A: The pressure release button has a screw under the bracket. Simply tighten that screw and the leaking should stop. Q: Water Pressure is slowing after some time. A: Recommended changing the cartridges every 6-12 months depending on the amount of contaminants present in the feed water supply. If the system has been working correctly and the water pressure is slowing, it may be time to change the filter cartridge element. Q: Water Pressure is slowing immediately after installation when using a Carbon Cartridge. A1: Check the filter cartridge has not been installed incorrectly. Make sure the plastic wrapper around the filter has been removed. A2: Bathtubs, utility sinks, garden hoses, showers, or anything considered high flow should be avoided for the first 72 hours. Any high-flow situation within the first 72 hours may cause a temporary carbon blockage. To clear the blockage, turn off any running water for at least 10 minutes and resume using water at low or regular flow rates. Q: Water appears cloudy and grey. A: The water may appear cloudy or grey for the first 3-5 days after installation due to the tiny air bubbles being purged from the filters and extra carbon dust in the water. (depending on the filter cartridge being used) To solve this problem, please flush the whole system for about 10 minutes after you install it, then close the faucet and wait for one hour. And repeat the steps until the output water is clean. SERVING USA SINCE 2006. SimPure dedicated in providing world-class quality of water filtration solutions. Please contact our trained water specialists. And is available to answer any questions during the life of the product.
3-Stage Water Filter System Whole House 20×4.5 Big Blue Housings Pressure Gauge
SimPure SPWH-3S 20″ x 4.5″ 3 Stage Big Blue Whole House Water Filtration System (1 Inlet/Outlet Port) with Big Housings & Pressure Gauges – GAC Filter, Carbon Block, Sediment Filter Cartridges – Whole Home Water Filters Portable Steal Frame. The SimPure SPWH-3S is a 3 Stage Whole House Filtration System(PP Sediment + GAC + CTO). 1st filter (PP sediment filter) can remove dirt, silt, sand, rust and scale particles. The 2nd-stage filter (GAC granulated activated carbon filter) can remove chlorine, chloramine, VOCs and etc. The 3rd- filter(CTO carbon block filter) can remove chlorine, chloramine, VOCs, bad taste and odor. Extend the life of your dishwasher and other appliances, and reduce cost of the energy. With our instruction you can use and install SPWH-3S 3-stage whole house water filtration system with no problem. Housing Bracket so You can choose mounted or unmounted installation. Pressure gauges help to monitoring your system and to know which filter you need to change and when. Remove the filters easily by the Pressure Release Buttons. The black cap has. 1 female National Pipe Thread Taper (NPT). Threaded input and output connections, DOUBLE O-ring to ensure watertight seal. Our 3-Stage water filter system consists of two NSF standard, the 1-stage clear PP housing allows you to monitor the filter cartridge usage at anytime, anywhere, making it more convenient than traditional blue filter housings. They are made of reinforced polypropylene for strength and resistance. And we’ve improved the thickness and durability of the filter bottles. You can confidently use it as a pre-filter for municipal or well water sources. Longer Lifetime: – The carbon filter has a lifetime of. While the sediment filter&GAC filter can last for. The duration depends on your water quality. With a 5? M filter pore size, it effectively removes sediment, rust, dust, and large impurities from the water, reducing odors, discoloration, and chlorine, resulting in improved taste. To ensure water quality and extend product lifespan, we recommend a water pressure of 25-90 psi and a temperature range of 41-100°F. This SPWH-3S water filtration system connects directly to your home’s main water supply and fits standard American plumbing with 1 NPT inlet and outlet. It comes with a installation and maintenance guide. And It Is Easy to Replace Water Filter Cartridges: All SimPure Water whole house water filter replacement cartridges are designed for quick and easy replacement to keep your system up and running. The SimPure SPWH-3S Water Whole Home Water Filtration Systems is constructed with standing stainless-steel frames for long term durability and quality. Our 3-stage whole house system offering. Up to 150,000 gallons. Of clean water for a year for your family, it’s built for longevity. Features easy-to-change cartridges, transparent sediment housing, and pressure gauges. Enjoy benefits like no wastewater, consistent water pressure, chlorine-free showers, cleaner plumbing, and longer appliance life. Stage 1: PP Sediment Filter. Remove dirt, silt, sand, rust and scale particles, etc. Stage 2: GAC Filter. Remove chlorine, chloramine, VOCs, etc. Stage 3: CTO Filter. Remove chlorine, chloramine, VOCs, bad taste and odor, etc. Double O-Ring ensure watertight seal. Three accessible pressure release buttons for easy filter change. Three pressure gauges: Monitor your system’s performance, know which filters you need to change and when to change them. Standard 1 female NPT thread connections and long high efficiency housings for easy adaptability and high flow. Material: 100% food-grade ABS + Metal + Stainless Steel. Filter Size: 20 4.5 Inch. Filter Life (Months): 6 Month. Flow Rate (GPM): 15 GPM. Inlet/outlet Connection: 1 female NPT thread. Temperature Range: 41-100? (5-38?). Pressure Range: 25 – 90 psi. 1x SPWH-3S assembled housing kit with bracket. 2x Plastic Expansion Nail. 6x Installed O-rings (2 in each housing). 1x Punch Positioning Sticker. Q: Leaks between filter head and filter bowl of housing? A1: Tap water pressure is too high; make sure it is below 90psi (620kpa). If too high, fit a pressure regulator. A2: The O-ring may not be in place. Clean and lubricate O ring with silicone grease. Also, clean the groove where the O-ring sits. Replace O-ring in the groove above threads. Screw the bowl back on the filter head securely by hand, then use the wrench to fit it snugly. Do not over tighten. Q: Leaks on inlet/outlet connections? A1: Wrap the Teflon tape around pipe threads of each fitting in a clockwise direction, add more tape as necessary for the correct seal. A2: Brass fittings may require to tighten ½-turn with a wrench. Q: Leaks from the pressure release button? A: The pressure release button has a screw under the bracket. Simply tighten that screw and the leaking should stop. Q: Water Pressure is slowing after some time? A: Recommended changing the cartridges every 6-12 months depending on the amount of contaminants present in the feed water supply. If the system has been working correctly and the water pressure is slowing, it may be time to change the filter cartridge element. Q: Water Pressure is slowing immediately after installation when using a Carbon Cartridge? A1: Make sure the plastic wrapper around the filter has been removed. Check the filter cartridge has not been installed incorrectly, especially the GAC filter, please look at the picture, this is the botttom side of the GAC filter. A2: Bathtubs, utility sinks, garden hoses, showers, or anything considered high-flow should be avoided for the first 72 hours. Any high-flow situation within the first 72 hours may cause a temporary carbon blockage. To clear the blockage, turn off any running water for at least 10 minutes and resume using water at low or regular flow rates. Q: Water appears cloudy and grey. A: The water may appear cloudy or grey for the first 3-5 days after installation due to the tiny air bubbles being purged from the filters and extra carbon dust in the water. (depending on the filter cartridge being used) To solve this problem, please flush the whole system for about 10 minutes after you install it, then close the faucet and wait for one hour. And repeat the steps until the output water is clean. SERVING USA SINCE 2006. SimPure dedicated in providing world-class quality of water filtration solutions. Please contact our trained water specialists. And is available to answer any questions during the life of the product.
SimPure 2-Stage Whole House Water Filter System 10×4.5 Big Blue Clear Housings
This filter system works with Whole-house Water Filtration Systems, Undersink Water Filtration Systems, RO Systems. Including with SimPure DB10/DB20/DB1025, Culligan(WH-HD200-C, HD-950A, HF-360A), Pen-tek 10 BB filter housings, APEC HBB-10, DuPont WFPF13003B, GE GXWH20S, etc.
3 Stage RV Water Filter System Clear Housings 3/4 Male / Female Hose Fittings
RV Water Filter System that’s Economical with 3 Stage’s for extra clean tasting water. This system flows Left to Right.. This RV water filter system comes with a newly designed housing, made of the highest quality FDA Approved Reinforced Polypropylene. Outstanding Burst limit pressure of above 360+ PSI and high flow rate. This system lets the customer see what’s going on. (What’s in the Box:). 3 Stage Water Filter System. 1 x Steel Hanging Bracket. 3 x White Connected Filter Heads 3/4 FNPT Threaded Ports. 2 x 1 Threaded Filter Head Fittings. 2 x White Filter Housings with Leak Proof O-Rings. 1 x Clear Filter Housings. 1 x Sediment Filter. 1 x UDF Carbon Filter. 1 x CTO Carbon Filter. 1 x Housing Wrench. 1 x 3/4 Male Hose Fitting. 1 x 3/4 Spinning Female Hose Fitting. 1 x Roll of Teflon Tape. 1 x Package of Bracket Hanging Screws. This RV System Cleans the water that enter’s your Recreational Vehicle. 1st stage: 10 Premium PP Polypropylene. 1 Micron sediment filter. Removes dust, dirt, silt, sand, Iron, rust and scale particles in the filter and extends the life of the system. 2nd stage: 10 Premium UDF/GAC Granular Activated Carbon. 5 Micron Filter removes chlorine, Sulfur, radon, VOCs, Pesticide’s and other common chemicals. This filter also removes cloudiness, offensive odors, colors and improves taste. 3rd stage: 10 Premium CTO Carbon Block. 5 Micron Filter removes chlorine, Sulfur, radon, VOCS, insecticides, pesticides, industrial solvents and improves taste. Working pressure: 20 to 125 psi water pressure. Clear Housing design that accepts standard 10″ x 2.5″ filter cartridges. Made to NSF Standards. Just unwrap the filters and reinstall in housings. This water filter system is not returnable if system has been used.