Pure Water Clean Air in Every House. Give us a call. Send us a message. BLUONICS CTO Carbon Block & Sediment 8pcs 20″x 4.5″ Replacement Filters. 4 pcs Standard Size 4.5″x 20″ (5 Micron) Sediment Filter. Filters sediment particles such as silt, sand, rust, dirt, and other undissolved particles. Melt-blown Polypropylene Sediment Filters. The main function of a sediment filter is to remove large and fine particles from our drinking water, such as sand, dirt, silt, and rust particles. Our Sediment filters are made of fine melted polypropylene, which is then blown and spun in a cylinder-like form. These filters have a lower density at the surface of the filter with progressively higher density toward the center which enables to capture of particles throughout the entire filter depth. This translates to a longer life and allows better performance of all the following filters, such as Carbon Block or GAC filters. 4 pcs standard size 4.5 x 20 Block Activated Carbon Filters (5 Micron) – Block Carbon Filters (5 Micron) are similar in their performance to that of granulated GAC filters, being made of fine coconut shell charcoal carbon tightly compressed forming a cylinder block. Solid-block activated charcoal is superior at adsorption because all the water molecules are forced to travel through the compressed charcoal. Also since it is made of packed carbon it helps to trap suspended particles and dirt. They are excellent in removing chlorine, pesticides, herbicides, bad taste & odor, organic solvents, chemicals, and contaminants that contribute to bad taste and odor leaving our water healthier and great tasting. Flow rate: 5-15 GPM (Depend on Feed Water Pressure). Maximum Pressure: 80 psi, SUGGESTED WORK PRESSURE: UNDER 50 PSI, Temperature:40-110°F/5-45°C. Average lifetime 6 months. (Depends on your water quality). Compatible with systems from 3M, APEC, Aqua-Pure, Aquasana, Culligan, Costway, DuPont, GE, Geekpure, Glacier Bay, Global Water, Olympia, Pentek, Smart Aqua Life, The Perfect Water, US Aqua, Whirlpool All mentions of brand names or model descriptions are made strictly to illustrate compatibility. All brand names are registered trademarks of their respective owners. SAFE & RELIABLE: Bluonics whole house filter reduces many impurities from your water by 99% and protects your family and appliance from Sediment, Sand, Dirt, and more. Bluonics Sediment filters are environmentally friendly, chemical Free, no chlorine, no change of taste, color, and odor. Do not change acidic or alkaline water levels and has no impact on pH. QUALITY: Fits most standard size 4.5 x 20 Filter housings. Is highly effective for both residential and commercial water purification, and can be used for the city/municipal or well water. EFFECTIVE: Removes sediment particles such as silt, sand, rust, dirt, and other undissolved particles up to microns. And, removes chlorine, bad taste, odor, and many impurities from tap water to offer sparkling clean and great tasting water throughout your whole house. Please note this filter is not a Reverse Osmosis and will NOT reduce (TDS) Total Dissolved Solids from your water. Looking for a system to remove TDS, you can check Bluonics RO systems. The cartridges are individually wrapped for freshness. Please unwrap the cartridges before using them. Lifetime tech support from Bluonics in Sacramento, California, USA.
SimPure SPWH-2S 10″ x 4.5″ 2 Stage Whole House Water Filtration System (1″ Inlet/Outlet Port) with Big Housings & Pressure Relief Valve- GAC Filter, Carbon Block, Sediment Filter Cartridges – Remove Silt, Sand, Rust, Dirt, Chlorine, Taste & Odors, Iron, Lead, Manganese, 1″ NPT Brass Port, BPA Free – Whole Home/Pool/Well/Farm Water Filters Portable Steal Frame. Brass NPT Thread+Dual O-Ring. SimPure 2-stage whole house water filter system has upgraded the material at the connection points, replacing plastic with brass fittings, significantly extending the product’s lifespan. In addition, we also utilize dual O-ring seals, which effectively reduce the risk of leaks and ensure a tighter seal at the connection points. Main Features: With our instruction you can use and install SPWH-2S 2-stage whole house water filtration system with no problem. Housing Bracket so You can choose mounted or unmounted installation. Clear Housing help you to know which filter and when you need to change. Remove the filters easily by the Pressure Release Buttons. The black cap has 1 female National Pipe Thread Taper (NPT) threaded input and output connections, DOUBLE O-ring to ensure watertight seal. The SimPure SPWH-2S is a 2 Stage Whole House Filtration System(PP Sediment + CTO). 1st filter (PP sediment filter) can remove dirt, silt, sand, rust and scale particles. The 2nd- filter(CTO carbon block filter) can remove chlorine, chloramine, VOCs, bad taste and odor. Extend the life of your dishwasher and other appliances, and reduce cost of the energy. Visible Clear Housing: Our well water filter system for the house consists of two NSF standard transparent filter housing, which allows you to monitor the filter cartridge usage anytime, anywhere, making it more convenient than traditional blue filter housing. They are made of reinforced polypropylene for strength and resistance to chemicals. Furthermore, we’ve improved the quality of the filter bottles by increasing their thickness and durability. The Ultimate Home Filtration Solution : SimPure home water pre-filtration system is compatible with most standard 10″ x 4.5″ filter cartridges and provides excellent filtration performance. It can provide you and your family with up to. Of clean water for a year. Additionally, filtered water contributes to preserving your health and prolonging the lifespan of your appliances. You can connect it to municipal or well water. Suitable for homes, RVs, boats, mobile homes, and gardening. This SPWH-2S water filtration system connects directly to your home’s main water supply and fits standard American plumbing with 1 NPT inlet and outlet. It comes with a installation and maintenance guide. And It Is Easy to Replace Water Filter Cartridges: All SimPure Water whole house water filter replacement cartridges are designed for quick and easy replacement to keep your system up and running. The SimPure SPWH-2S Water Whole Home Water Filtration Systems is constructed with standing stainless-steel frames for long term durability and quality. Longer Lifespan: The carbon filter has a lifespan of 3-6 months, while the sediment filter can last for 6-12 months. Of course, the specific duration depends on your water quality. With a 5? M filter pore size, it effectively removes sediment, rust, dust, and large impurities from the water, reducing odors, discoloration, and chlorine, resulting in improved taste. We recommend a water pressure of 25-90 psi and a temperature range of 41-100°F. Remove dirt, silt, sand, rust and scale particles, etc. Remove chlorine, chloramine, VOCs, bad taste and odor, etc. Double O-Ring ensure watertight seal. Three accessible pressure release buttons for easy filter change. Big Clear Housing let you know when to replace the filters. The pressure relief Valve: Let you replace the filter cartridges easily. Standard 1 female NPT thread connections and long high efficiency housings for easy adaptability and high flow. Filter Size: 10 4.5 Inch. Product Size: 14.3″L 7.6″W 15.4H. Flow Rate (GPM): 15 GPM. Pressure Range: 25 – 90 psi. Feed Water Press: 25-90PSI. Feed Water Temperature: 41-100? (5-38?). Filtration Rate: MAX 15 Gallons (57L) Per Minute. Inlet/outlet Connection: 1 female NPT thread. Material: 100% food-grade ABS + Metal + Stainless Steel. Filter Life: Sediment Filter. Depending on water quality. Before using: Make sure the connection is correct and check for water leaks. 1 Female NPT Thread. 14.3″L 7.6″W 15.4H. MAX 15 Gallons (57L) Per Minute. Sediment Filter 3-6 Month, Carbon Filter 6-12 Month. Make sure the connection is correct and check for water leaks. Q:Leaks between filter head and filter bowl of housing. A1: Tap water pressure is too high; make sure it is below 90psi (620kpa). If too high, fit a pressure regulator. The O-ring may not be in place. A2: O-ring with silicone grease. Also, clean the groove where the O-ring sits. Replace O-ring in the groove above threads. Screw the bowl back on the filter head securely by hand, then use the wrench to fit it snugly. Do not over tighten. Q: Leaks on inlet/outlet connections. A1: Wrap the Teflon tape around pipe threads of each fitting in a clockwise direction, add more tape as necessary for the correct seal. A2: Brass fittings may require to tighten ½-turn with a wrench. Q: Leaks from the pressure release button. A: The pressure release button has a screw under the bracket. Simply tighten that screw and the leaking should stop. Q: Water Pressure is slowing after some time. A: Recommended changing the cartridges every 6-12 months depending on the amount of contaminants present in the feed water supply. If the system has been working correctly and the water pressure is slowing, it may be time to change the filter cartridge element. Q: Water Pressure is slowing immediately after installation when using a Carbon Cartridge. A1: Check the filter cartridge has not been installed incorrectly. Make sure the plastic wrapper around the filter has been removed. A2: Bathtubs, utility sinks, garden hoses, showers, or anything considered high flow should be avoided for the first 72 hours. Any high-flow situation within the first 72 hours may cause a temporary carbon blockage. To clear the blockage, turn off any running water for at least 10 minutes and resume using water at low or regular flow rates. Q: Water appears cloudy and grey. A: The water may appear cloudy or grey for the first 3-5 days after installation due to the tiny air bubbles being purged from the filters and extra carbon dust in the water. (depending on the filter cartridge being used) To solve this problem, please flush the whole system for about 10 minutes after you install it, then close the faucet and wait for one hour. And repeat the steps until the output water is clean. Accecories: 1x Wrench 2x Screws 2x Plastic Expansion Nail 4x Installed O-rings (2 in each housing) 2x Teflon Tapes 1x Punch Positioning Sticker. 1x DB10C-2 assembled housing kit with bracket. 1x Pre-Installed Filters (1PP sediment+1CTO filters). Not all of the items are included in the package, please choose the “MODEL” you need in the selection. SERVING USA SINCE 2006. SimPure dedicated in providing world-class quality of water filtration solutions. Please contact our trained water specialists. And is available to answer any questions during the life of the product.