Tag Archives: continuous

Nitrate_Sulfate_Well_Water_Filter_Whole_House_Continuous_Duty_9100_Twin_1_5_01_bnv

Nitrate & Sulfate Well Water Filter Whole House Continuous Duty 9100 Twin 1.5

Posted on July 23, 2020 Tag by  , , , , , , , , , Category in  nitrate
Nitrate & Sulfate Well Water Filter Whole House Continuous Duty 9100 Twin 1.5

Nitrate & Sulfate Well Water Filter Whole House Continuous Duty 9100 Twin 1.5
Nitrate Removal System 9100 Twin 1.5: includes 3/4 inch or 1 inch pipe connectors, by-pass valve; 1.5 x 2 (each tank 1.0 cubic foot) cubic foot high capacity nitrate selective anion nitrate resin with 48000 grain capacity each (each tank removes approximately 48000 grains of nitrate as CaCO4); and Fleck 9100 115v control valve. All the filter media you need for the system is included. Nitrate levels in excess of 2 to 4 ppm are often a result of fertilizer run-off from agricultural operations or from leaking septic tank systems. These automatic nitrate removal systems properly sized and maintained can reduce nitrate levels by 80%. In place of toxic chemicals these systems regenerate with common water softening salt. Sizing is important and a complete general mineral water analysis is recommended. Sulfates affect performance and it is important to know the sulfate levels in addition to the nitrate levels. Filter tank is NSF certified one piece seamless polyester construction for long life. Max pressure recommended is 100 psi. Maximum water temperature recommended 100F. Heavy duty Fleck 9100 twin-tank on-demand control valve perfect for light commercial or heavy-residential systems that require continuous nitrate-filtered water. Five cycle control delivers controlled upflow backwash downflow brining slow rinse and rapid rinse all with nitrate-filtered water. Very salt efficient because no reserve needs to be programmed with twin tanks the nitrate filter can start a regeneration immediately on demand. Best nitrate filtration occurs with a maximum of 3 gallons per minute flow rate, but peak flow rates of up to 6 gpm are possible. The backwash flow rate is 2 gpm. Actual nitrate removal capacity depends on the total amount of nitrate and sulfates present in the water. Filter tank diameter: 10 inches. Filter tank height: 54 inches. Height including control valve: 61 inches. Brine tank: 18 x 33 inches. All tanks are NSF Certified & top quality. Made in the U. The item “Nitrate & Sulfate Well Water Filter Whole House Continuous Duty 9100 Twin 1.5″ is in sale since Wednesday, July 15, 2020. This item is in the category “Home & Garden\Kitchen, Dining & Bar\Small Kitchen Appliances\Water Purification\Water Filters”. The seller is “cleanwaterstore” and is located in Santa Cruz, California. This item can be shipped to United States, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Panama, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
  • Country/Region of Manufacture: United States
  • Filtration Method: Carbon/Charcoal
  • Type: Water Filter
  • MPN: NI001530

Nitrate & Sulfate Well Water Filter Whole House Continuous Duty 9100 Twin 1.5

Department