Tag Archives: built
AFW Filters Built 2 cu ft Digital Nitrate/Nitrite Whole House Filter Water
AFW Filters Water Bottle Install Kit Included. Comes with silicone lubricant, Sani pack, hardness test strip, and USB installation instructions for the perfect DIY install!! To keep costs down, most people use a system that combines nitrate/nitrite specific resin with standard softening resin. These combo systems provide all the benefits of a nitrate/nitrite filter with the softening ability of a water softener. The lower cost of softening resin also provides a lower price than the nitrate/nitrite only systems. At a cheaper price than a nitrate/nitrite only system. This system comes complete with a brine tank that includes a float assembly for added reliability and peace of mind. Complete System – 12-inchx48-inch resin tank, Riser tube with distributor basket, 1 cu ft softening resin/1 cu ft nitrate resin, Digital Fleck 5600SXT Metered Control Head, Bypass with 1 Yoke Connection, Brine Tank with Safety Float. On-Demand – Flow meter measures water and regenerates based on water use, not time, conserving salt and water Standard configurations are half softening resin and half nitrate specific resin. 39,600 ppm/32,000 grain capacity – Contains 1 cubic foot of nitrate specific resin capable of removing up to 39,600 ppm of nitrates/nitrites and 1 cubic foot of high capacity softening resin capable of removing 32,000 grains of hardness between regeneration cycles. 12 GPM Service Flow – Treats a maximum flow rate of 12 gallons per minute. Removes Nitrates/Nitrites – Nitrate selective resin traps and eliminates harmful nitrates/nitrites. Prevents “Blue Baby Syndrome” – Methemoglobinemia reduces the ability of blood to properly transport oxygen. Digital Fleck 5600SXT Control Head – The digital head provides a more user-friendly system with a LCD display, push-button operation, and additional programming options. Additionally, the digital head allows for more efficient operation than the standard mechanical head. Comes with silicone lubricant, Sani pack, hardness test strip, and USB installation instructions for the perfect DIY install!
Pentair Fleck Built Whole House Water Softener 64,000 Grains Capacity
Pentair Fleck control valve. Mineral Tank (Black, Almond or Blue) 12″ x 52″. 1 Bypass (Stainless Steel). C150 Resin 2 cu ft 10% CROSS LINK. 15 X 34 Brine Tank. Distributor Assembly W/ Upper and Lower Screen. Solid State Microprocessor W/ LED Display. Time of day, Remaining capacity & regeneration cycle in progress. Down flow & Up flow regeneration cycles. 3 Modes of operation: Delayed Meter Regeneration, Delayed Time or Clock Regeneration. NOVRAM Valve status & memory back up. Working PSI 20 – 125PSI. Water Softener is an Ion Exchanger. Hard Water with a high calcium/magnesium content enters the softener through the “in” port indicated by the green arrow. It passes through the control valve and in to the tank where it goes from top to bottom through a specially prepared resin that “softens” it, the resin consists of specially manufactured beads that have been saturated with sodium ions. Softening occurs as the hardness minerals in the water attach themselves to the resin and are “exchanged” for sodium. The softened water then enters the long center tube called a riser, via the strainer basket at the bottom of the tank and passes upward through the riser. Then water exits the softener via the control valve (Blue Arrow) and is sent to the desired location. When the resin becomes saturated by hardness minerals, the softener automatically goes into re-generation. The re-generation process is initiated by a time or a meter depending on the type of softener. By this process the hardness minerals are washed down the drain and resin bed is rinsed, re-settled and re-charged with sodium, it is now ready again to soften your water. The re-generation process is accomplished by passing very salty water from the brine tank through the resin. The brine tank must remain filled with softener salt at all times so that it can re-generate the softening resin. We stand behind everything we sell. Used or installed items are not refundable. The item “Pentair Fleck Built Whole House Water Softener 64,000 Grains Capacity” is in sale since Friday, August 17, 2018. This item is in the category “Home & Garden\Kitchen, Dining & Bar\Small Kitchen Appliances\Water Purification\Water Filters”. The seller is “waterproshop.usa” and is located in Cypress, California. This item can be shipped to United States.
- Country/Region of Manufacture: United States
- MPN: Does Not Apply
- Number of Filtrations: 2
- Brand: Penter Fleck, Evertech,
- Country of Manufacture: United States
Pentair Fleck Built Whole House Water Softener 24,000 Grains Capacity
Pentair Fleck control valve. Mineral Tank (Black, Almond or Blue) 8″ X 44″. 1 Bypass (Stainless Steel). 75 10% CROSS LINK. 18 X 33 Brine Tank. Distributor Assembly W/ Upper and Lower Screen. Solid State Microprocessor W/ LED Display. Time of day, Remaining capacity & regeneration cycle in progress. Down flow & Up flow regeneration cycles. 3 Modes of operation: Delayed Meter Regeneration, Delayed Time or Clock Regeneration. NOVRAM Valve status & memory back up. Working PSI 20 – 125PSI. Water Softener is an Ion Exchanger. Hard Water with a high calcium/magnesium content enters the softener through the “in” port indicated by the green arrow. It passes through the control valve and in to the tank where it goes from top to bottom through a specially prepared resin that “softens” it, the resin consists of specially manufactured beads that have been saturated with sodium ions. Softening occurs as the hardness minerals in the water attach themselves to the resin and are “exchanged” for sodium. The softened water then enters the long center tube called a riser, via the strainer basket at the bottom of the tank and passes upward through the riser. Then water exits the softener via the control valve (Blue Arrow) and is sent to the desired location. When the resin becomes saturated by hardness minerals, the softener automatically goes into re-generation. The re-generation process is initiated by a time or a meter depending on the type of softener. By this process the hardness minerals are washed down the drain and resin bed is rinsed, re-settled and re-charged with sodium, it is now ready again to soften your water. The re-generation process is accomplished by passing very salty water from the brine tank through the resin. The brine tank must remain filled with softener salt at all times so that it can re-generate the softening resin. We stand behind everything we sell. Used or installed items are not refundable. The item “Pentair Fleck Built Whole House Water Softener 24,000 Grains Capacity” is in sale since Friday, August 17, 2018. This item is in the category “Home & Garden\Kitchen, Dining & Bar\Small Kitchen Appliances\Water Purification\Water Filters”. The seller is “waterproshop.usa” and is located in Cypress, California. This item can be shipped to United States.
- Country/Region of Manufacture: United States
- MPN: Does Not Apply
- Number of Filtrations: 2
- Brand: Penter Fleck, Evertech,
- Country of Manufacture: United States