25 X 5 micron Sediment Water Filter Whole House Cartridge Replacement 20 x2.5

Protect Your Family and Household Appliance from Sediments: The FP25 sediment filters are specially designed to remove sediments, dust, sand, large particles, silt, dirt, and rust from water. They are usually used as the first stage of a water filtration system to prevent the filters that follow from getting clogged too soon. Standard Size: Our filter fits standard 20″ x 2.5″ housings, including brand name models. Top-Notch Quality: The FP25 high capacity polypropylene sediment filter is able to achieve filtration down to 5 microns. The filters are tested by an independent third-party to meet NSF/ANSI standards. They have a capacity of 30,000 gallons of water, enough to supply a family of four with clean water for half a year (depending on your water quality). The 20″ x 2.5″ filter cartridges have a minimum impact on water flow (up to 12 GPM) and require minimum maintenance. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help! Please Note: The cartridges are individually wrapped to ensure freshness. Please unwrap the cartridges before use. Unlike an RO membrane, the filters don’t reduce Total Dissolved Solids (TDS), and instead keeps healthy minerals in your water. If you are interested in a filter that removes TDS, consider our iSpring Reverse Osmosis (RO) systems. ISpring Universal PP Sediment Filters. Different water filters have different purposes. Some are designed to remove chemicals from water. Others remove metallic contaminants, dissolved solids, or charged particles. Polypropylene sediment filters are usually placed as the first stage of the water filtration system to remove suspended solids, variously referred to as turbidity, sediment, or particulate. PP sediment filters are widely used as beds of natural media like garnet, sand, and anthracite to filter out unwanted particles like dirt and iron rust. In general, flow rates for sediment filters are higher than equally sized carbon or media filters. The tighter the filter is, the slower the flow will be. ISpring provides a wide variety of micron sizes to suit your specific need. ISpring sediment filters are compatible with most water filtration systems’ housing on the market. FP11: 10, 1 micron. FP15: 10, 5 micron. FP110: 10, 10 micron. FP120: 10, 20 micron. FP25: 20, 5 micron. FP15B: 10, 5 micron. FP25B: 20, 5 micron. FP220B: 20, 20 micron. Evenly separated spiral pattern increases pressure resistant, filtration area, and water flow. Sparse Layer: Large particles are filtered to extend the filter life. Compaction Layer: Made with fine fiber and filters smaller particles that passed through the sparse layer. Precision Layer: Small dust is filtered to assure efficiency of water filtration process in the following stages. ISpring sediment filters are manufactured to comply strictly with FDA standard (CFR – Part 177) and tested by independent third party against NSF/ANSI standard for material safety and water quality. (NSF/ANSI 42, by NSF International, 10/2018). 2.5″ X 20″. 5 Micron Sediment Reducing. Up to 30,000 Gallons (6 months). This item is in the category “Home & Garden\Kitchen, Dining & Bar\Small Kitchen Appliances\Water Purification\Water Filters”. The seller is “ispringwatersystems” and is located in this country: US. This item can be shipped to United States.

• Model: FP25X25
• Custom Bundle: No
• Item Depth: 20 in
• Item Height: 5 in
• Number of Filtration Stages: 1-Stage
• Item Width: 25 in
• Compatible Brand: For iSpring, For WaterDrop, Universal
• Material: Polypropylene, Lead-free & BPA-free Material
• Filtration Method: Sediment
• Capacity: 12 GPM
• Type: Water Filter
• Number in Pack: 25
• Compatible Model: For iSpring, For WaterDrop, Universal, For Watts Premier, Dow Filmtec
• Color: White
• Contaminant Removal: Sediment & dust & rust and more
• Standard Size: 20” x 2. 5”
• Brand: iSpring
• Suitable For: Commercial, Household
• FP25X25: NSF
• UPC: 641990962963