Whole House Fluoride Removal Water Filter BONE CHAR -1 Cubic Ft + In/Out 9x48T

If you want to remove fluoride from more than just your kitchen sink, a whole house system will work for you. This system removes fluoride from every faucet with one convenient system. This whole house with 1 cubic foot of bone char. You can also choose to add on a 10 Big Blue housing sediment prefilter (recommended). 1 cubic foot of bone char will remove approximately 1.0 mg/l of fluoride. Bone char is known to be one of the most effective methods to remove any type of fluoride from your drinking water. Bone char is also very effective removing heavy metals, pesticides and chlorine. 1 Cubic Foot System: 9″ x 48″ inch Mineral Tank IN/OUT Valve. 1 CUBIC FOOT OF BONE CHAR FLUORIDE REMOVAL MEDIA – Pre-filled in Tank. WHOLE HOUSE 1 CU FT BONE CHAR CARBON + IN/OUT VALVE. This system is easy to set up. With this system you will receive. 9″ x 48″ FRP Vessel. Colors Black/Blue/Almond IN/OUT Valve 1 CU FT Bone Char Blend Carbon Pre-filled in tank 1 In/Out ports. The use of bone charcoal or bone char is reported to be an effective means for the reduction of fluoride. Bone charcoal contains a carbon structure while supporting a porous hydroxyapatite matrix (a calcium phosphate hydroxide in crystalline form which is rich in surface ions which can be readily replaced by fluoride ion). This filter works like regular carbon as well. A whole-house filter system treats all water traveling to any faucet or fixture in the home. It removes the chemical before it can be ingested, breathed in, or absorbed by the skin during washing or bathing. A larger carbon filter like this one provides better filtration because of the amount of carbon, and depth of the filter bed. It does not cause a water pressure drop in your home compared to solid block carbon filter installed at the point of entry. Carbon removes/reduces many volatile organic chemicals (VOC’s), pesticides and herbicides, as well as chlorine, benzene, trihalomethane (THM) compounds, radon, solvents and hundreds of other man-made chemicals found in tap water. Carbon is a substance that has a long history of being used to absorb impurities and is perhaps the most powerful absorbent known to man. One pound of carbon contains a surface area of roughly 125 acres and can absorb literally thousands of different chemicals. Activated carbon which has a slight electro-positive charge added to it, making it even more attractive to chemicals and impurities. This filter contains 2 cu ft of bone char media. What else can it remove? Bone char can not only reduce fluoride, it can also reduce or remove cadmium, lead, iron, manganese, mercury, zinc, copper, nickel, aluminum, arsenic, fertilizers, radio-nuclide, herbicides, pesticides, radium and uranium. It’s also been shown to remove tributyl tin oxide, nuvan and malochite green. How long does it last? Point of use fluoride filter systems can handle about 5,000 gallons before a filter change, while whole house systems can handle about 100,000 gallons. This varies depending on your use and fluoride levels but the average four person family should only need an annual filter change. By having bulk bone char on hand you can change it out at any time.