WHOLE HOUSE WATER FILTERS SYSTEMS KDF85/Catalytic Carbon IRON/HYDROGEN SULFIDE

WHOLE HOUSE WATER FILTER. Whole-House Filter or Point of Entry. A whole-house filter is installed at a point on the homes water supply plumbing that will result in treatment of all water that travels to any faucet or fixture in the home. A whole-house filter system treats all water traveling to any faucet or fixture in the home. It removes the chemical before it can be ingested, breathed in, or absorbed by the skin during washing or bathing. Catalytic Activity Promotes a wide variety of chemical reactions where conventional carbons are not effective. Non-Impregnated Eliminates sates concerns with exotherm, ignition temperature and disposal. On-Site Regeneration Capability Reduced operating cost, extended service life. Thermal Reactivation Option can be recycled and reused. High Conversion Rates Efficient use of reactants. Simple Equipment design Handles fluctuating inlet concentrations, replaces more costly technologies with a passive system. Faster Chemical Reaction Rates Reduced carbon requirements, smaller equipment needed. Though Catalytic is 100-percent freshly manufactured virgin GAC, it can be recycled and reused through thermal reactivation to restore its adsorptive capacity. This eliminates the costs and long-term liability associated with the disposal of spent GAC, and provides customers with a consistent, reliable supply of filtration media. Residential and Commercial Water Filters. One of the key characteristics of activated carbon is not only the high surface area available relative to their mass, but also the ability to act as a substrate for other materials. Activated carbons from Catalytic Carbons are carefully engineered to have the correct physical properties to optimize their use in this duty, manufactured from coconut shell, coal or wood bases. Similarly, the unique reactive nature of the internal surface of activated carbon means that there is an inherent ability for the promotion of reactions between gases and liquids that would either proceed too slowly or generate uneconomic yields of final product. This is achieved without the need for the addition of a chemical reagent to the activated carbon and often true catalysis proceeds, without degradation of the surface or adsorbent. Catalytic Carbons are engineered with specific characteristics making them ideally suited to use in all sectors of the catalysis market. V KDF 55 Process Media can remove up to 99% of water-soluble lead, mercury, nickel, chromium, and other dissolved metals. KDF-85 Tier1 water treatment media will help to reduce iron and hydrogen sulfide, while controlling scale, bacteria, fungi and algae. This treatment media has also been proven effective at reducing water soluble metals, including lead and mercury. V KDF process media to safely reduce or remove chlorine, iron, heavy metals, bacter. V Natural, no chemicals, long lasting. V Patented KDF process media are 100 percent recyclable and contain no chemical additives. V KDF Process Media enhance the performance, extend the life, reduce the maintenance and lower the total cost of many available carbon-based systems. V KDF Process Media help control microorganisms by creating an environment thats deadly to some microorganisms and that interferes with the ability of many other microorganisms to function. Either way, the use of KDF Process Media results in the total elimination of some contaminants and a great reduction of a wide variety of others. 1 – 1252 FRP Tank (Color Varies). 1 – 2 CU FT Coconut Shell Catalytic Carbon. 1 – KDF85 4 Chambers Media guard. 1 – Fleck 5600 SXT Filter Backwash Valve with Black Cover. 1 – Bypass Valve 1. Hydrogen sulfide concentrations exceeding 7 to 10 ppm can be removed by injecting an oxidizing chemical such as household bleach followed up by filtration. The oxidizing chemical should enter the water upstream from the storage or mixing tank to provide at least 30-45 minutes of contact time between the chemical and water. The length of length of the holding time is a function of the chemical dosage, tank configuration and water temperature. Sulfur particles can then be removed using a sediment filter and the excess chlorine can be removed by activated carbon filtration. If test results indicate that bacterial contamination is occurring, shock chlorination or disinfection is the most widely suggested method for initial treatment. Shock chlorination (disinfection) is the one-time introduction of a strong solution into the entire water distribution system well, pump, distribution pipeline, etc. When to Shock Disinfect the Well. Shock chlorination (disinfection) is recommended when lab results indicate a presence of bacteria upon completion of a new well or after pump replacement or repair, when the distribution system is opened for repairs or maintenance, following contamination by flood water, to control iron and sulfur bacteria. Shock chlorination (disinfection) is recommended in these circumstances to ensure that bacterial contamination is controlled. This system should be used where low to moderate ferrous (dissolved) iron or hydrogen sulfide contamination is known. This filter is most effective where iron and hydrogen sulfide levels are less then 5 ppm. Best removal rates are achieved where pH is between 6.5 and 8.5 and where water contains some dissolved oxygen. Selecting a water treatment system begins with water test results from a certified drinking water testing lab. Such test results should be compared to the water treatment product specifications to ensure that the treatment system being considered is designed to treat. The substances you want to treat. In the concentrations at which they exist in your water. There is no one-size-fits-all water treatment technology that addresses all water quality problems. In some cases, one treatment technology may meet all your specific needs. In other cases, you may need a treatment traina series of treatment technologies in a sequence that treat one or more water quality problems. Again, when considering water treatment, use your lab test results as a guide and make sure the technology you are considering is designed to treat the problematic substances in your water. Titan Water Pro is your Clean Water Solutions. The item “WHOLE HOUSE WATER FILTERS SYSTEMS KDF85/Catalytic Carbon IRON/HYDROGEN SULFIDE” is in sale since Thursday, April 29, 2021. This item is in the category “Home & Garden\Kitchen, Dining & Bar\Small Kitchen Appliances\Water Purification\Water Filters”. The seller is “titanwaterpro” and is located in Lancaster, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Model: TWPWW
• Compatible Brand: Titan Water Pro
• Filtration Method: Catalytic Carbon
• Type: Whole House Filter System
• Compatible Model: Pentair
• Color: Multicolor
• MPN: TWP188WHKG
• Contaminant Removal: Chlorine Taste & Odor, Well Water
• sulfide removal: heavy metal removal
• kdf: kdf85 media guard
• well water conditioner: iron removal
• ron bacteria: algae removal
• iron removal: hydrogen sulfide
• Power: 110V
• Brand: Titan