Whole House Water Filter KDF85/GAC 1.5. CUFT IronH2S Manual Backwash Valve

Whole_House_Water_Filter_KDF85_GAC_1_5_CUFT_IronH2S_Manual_Backwash_Valve_01_svd

Whole House Water Filter KDF85/GAC 1.5. CUFT IronH2S Manual Backwash Valve

Posted on May 31, 2021 Tag by  , , , , , , , , , Category in  whole
Whole House Water Filter KDF85/GAC 1.5. CUFT IronH2S Manual Backwash Valve

Whole House Water Filter KDF85/GAC 1.5. CUFT IronH2S Manual Backwash Valve
WHOLE HOUSE WATER FILTERS SYSTEMS KDF85/GAC Well Water – Iron/H2S. 1.5 CU FT OF GRANULAR ACTIVATED COCONUT SHELL CARBON. Carbon is a substance that has a long history of being used to absorb impurities and is perhaps the most powerful absorbent known to man. One pound of carbon contains a surface area of roughly 125 acres and can absorb literally thousands of different chemicals. Activated carbon which has a slight electro-positive charge added to it, making it even more attractive to chemicals and impurities. As the water passes over the positively charged carbon surface, the negative ions of the of the contaminants are drawn to the surface of the carbon granules. Activated carbon filters used for home water treatment typically contain either granular activated carbon or powdered block carbon. Although both are effective, carbon block filters generally have a higher contaminant removal ratio. The two most important factors affecting the efficiency of activated carbon filtration are the amount of carbon in the unit and the amount of time the contaminant spends in contact with it. The more carbon the better. Similarly, the lower the flow rate of the water, the more time contaminants will be in contact with the carbon, and the more absorption that will take place. Particle size also affects removal rates. The most common carbon types used in water filtration are bituminous, wood, and coconut shell carbons. While coconut shell carbon typically costs 20% more than the others, it is generally regarded as the most effective of the three. All of our activated carbon filters use coconut shell carbon. There are two principal mechanisms by which activated carbon removes contaminants from water; absorption, and catalytic reduction, a process involving the attraction of negatively-charged contaminants ions to the positively-charged activated carbon. Organic compounds are removed by absorption and residual disinfectants such as chlorine and chloramines are removed by catalytic reduction. Activated carbon filtration is very common in a number of home water treatment systems. It can be used as a stand alone filter to reduce or eliminate bad tastes and odors, chlorine, and many organic contaminants in municipal (pre-treated or chlorinated) water supplies to produce a significantly improved drinking water. It is also very commonly used as a pre-treatment as part of a reverse osmosis system to reduce many organic contaminants, chlorine, and other items that could foul the reverse osmosis membrane. Activated carbon filters remove/reduce many volatile organic chemicals (VOC), pesticides and herbicides, as well as chlorine, benzene, trihalomethane (THM) compounds, radon, solvents and hundreds of other man-made chemicals found in tap water. KDF85 Media Guard: Through this basic chemical process known as redox (oxidation/reduction), Kdf process media work behind the scenes to rid your water of chlorine, lead, mercury, iron and hydrogen sulfide. The redox reaction also inhibits the growth of bacteria, algae and fungi. As an added benefit, KDF media reduce lime scale, mold and fungi in your tub or shower. This unit includes the following. 10″ x 54″ FRP Tank (Color Varies). 1.5 Cu Ft Coconut Shell GAC Carbon. 1 KDF 85 Media Guard 4 chambers. 1 Manual Backwash Valve 1″ In & 1′ Out & 1″ Drain. Manual Controls are simple, reliable and inexpensive. Perfect for medias that require infrequent back washing or locations that lack electrical power. Manual Valve: How they work: The Manual valve. It has very few moving parts and easy to use. When you need to backwash a filter, you put it into the backwash cycle for 10 minutes, followed by a rinse for 3 minutes and then back to the service mode. That is all there is to it. Once a week schedule for back washing is generally sufficient. For a more economical product and ease of use, we recommend you get this rather than opting for unit that does not backwash, read the section on the benefits of back washing. Benefits and Importance of a Backwash Cycle:As the filter operates in service mode, it accumulates particles in the filter bed. Also since water’s nature is to follow the path of least resistance, after time it begins to create channels through the medium. As channels or holes in the media bed form, water begins to flow around rather than through the medium. This process is called “channeling” and it reduces the effectiveness of the filter considerably. The backwash is accomplished by sending the water down the riser tube from which it enters the filter tank at the bottom. The force of the water is such that it actually lifts the media bed, swirling and tossing the granular medium. The water leaves the filter’s drain line. Particles that were in the bed are washed to drain. The backwash is an intense rinsing and tossing of the medium that lasts for several minutes. In a standard residential filter, a typical backwash lasts about ten minutes. After the backwash, initiate a rinse of the bed during which water flows downward through the medium, up through the distribution tube and out the drain. The purpose of this rinse is to rinse and settle the bed an prepare it for return to service mode. A regular backwash schedule maintains the efficiency of the filter, as well as providing cleaner water. Hydrogen sulfide concentrations exceeding 7 to 10 ppm can be removed by injecting an oxidizing chemical such as household bleach followed up by filtration. The oxidizing chemical should enter the water upstream from the storage or mixing tank to provide at least 30-45 minutes of contact time between the chemical and water. The length of length of the holding time is a function of the chemical dosage, tank configuration and water temperature. Sulfur particles can then be removed using a sediment filter and the excess chlorine can be removed by activated carbon filtration. If test results indicate that bacterial contamination is occurring, shock chlorination or disinfection is the most widely suggested method for initial treatment. Shock chlorination (disinfection) is the one-time introduction of a strong solution into the entire water distribution system well, pump, distribution pipeline, etc. When to Shock Disinfect the Well. Shock chlorination (disinfection) is recommended when lab results indicate a presence of bacteria upon completion of a new well or after pump replacement or repair, when the distribution system is opened for repairs or maintenance, following contamination by flood water, to control iron and sulfur bacteria. Shock chlorination (disinfection) is recommended in these circumstances to ensure that bacterial contamination is controlled. This system should be used where low to moderate ferrous (dissolved) iron or hydrogen sulfide contamination is known. This filter is most effective where iron and hydrogen sulfide levels are less then 5 ppm. Best removal rates are achieved where pH is between 6.5 and 8.5 and where water contains some dissolved oxygen. Used or installed items are not eligible for return. Titan Water Pro is your “Clean Water Solutions”. The item “Whole House Water Filter KDF85/GAC 1.5. CUFT IronH2S Manual Backwash Valve” is in sale since Wednesday, December 23, 2020. This item is in the category “Home & Garden\Kitchen, Dining & Bar\Small Kitchen Appliances\Water Purification\Water Filters”. The seller is “titanwaterpro” and is located in Lancaster, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
  • Model: TWPWW1054
  • Filtration Method: Carbon/Charcoal
  • Type: Water Filter
  • Compatible Model: Titan
  • MPN: TWP188WHK
  • Contaminant Removal: Well Water
  • frp tank: mineral tank
  • Number of Filtrations: 2
  • kdf85: hydrogen sulfide removal
  • iron removal: heavy metal removal
  • gac carbon: coconut shell carbon
  • kdf mediaguard: MFV1 manual valve
  • Brand: Titan Water Pro
  • Suitable For: Household
  • backwash valve: manual backwash valve

Whole House Water Filter KDF85/GAC 1.5. CUFT IronH2S Manual Backwash Valve

Department