Whole House Water Filter System Catalytic Carbon (IN & OUT) No Electricity Required. In/Out tank-style water filters works great. Tank-style non-back washing filters are inexpensive, easy to set up, and easy to maintain. They use no electricity and need no drain connection. Since there’s nothing to wear out, they’re virtually trouble free. They use exactly the same granular filter media regular granular activated carbon that are used in our more expensive whole house back washing filters. The main requirement for use of these whole house non-back washing tank-style filters is clean water. If the objective is to remove chlorine from clean city water, a non-back washing In/Out filter does an exceptional job. Unless the inlet water is very clean and free of rust and other sediment, we recommend that a cartridge-style sediment filter be installed in front of the filter tank. The In/Out whole house carbon filters are efficient devices. They cost considerably less than their back washing counterparts and require less maintenance. They save water no back washing and they do not require electricity. With In/Out units, water simply enters the tank, passes through the media bed, and flows out. There is no cleaning process. Tank filters are arranged so that the water being treated flows upward through the tank, entering at the bottom and exiting at the top. This reversed flow lifts the bed, keeps it fresh, and minimizes channeling. The filters listed below are equipped with In/Out head offered. Estimated re-bed interval is every three years or so, depending on usage and chlorine content of your water. WHOLE HOUSE WATER FILTER. Whole-House Filter or Point of Entry. A whole-house filter is installed at a point on the homes water supply plumbing that will result in treatment of all water that travels to any faucet or fixture in the home. A whole-house filter system treats all water traveling to any faucet or fixture in the home. It removes the chemical before it can be ingested, breathed in, or absorbed by the skin during washing or bathing. Catalytic Carbon high activity granular activated carbon manufactured by steam activation of select coconut shell charcoal. The Catalytic activity of this activated carbon makes it highly effective for the removal of chloramines from potable water. Its large micropore volume makes it particularly well suited for the removal low molecular weight organic compounds and their chlorinate by-products such as chloroform and other trihalomethanes (THMs). An important feature of this material is its superior mechanical hardness and extensive dedusting during its manufacture ensures an exceptionally clean activated carbon product. Residential and Commercial Water Filters. One of the key characteristics of activated carbon is not only the high surface area available relative to their mass, but also the ability to act as a substrate for other materials. Activated carbons Carbons are carefully engineered to have the correct physical properties to optimize their use in this duty, manufactured from coconut shell, coal or wood bases. Many water utilities across the U. Are transitioning to chloramine for disinfection as an alternative to chlorine. This change is in response to stricter U. Environmental Protection Agency regulations on disinfection byproducts (DBPs), which are created when chlorine reacts with organics in water. Chloramine, a combination of chlorine and ammonia, is more stable and does not create DPBs. Removing chloramine at the point of use, however, is more difficult than removing chlorine. Standard granular activated carbon (GAC) and carbon gac products have limited capacity for chloramine reduction. Products known as catalytic or surface-modified activated carbon can provide a solution. In general, the catalytic properties of carbon are measured by the rate at which carbon decomposes hydrogen peroxide. The resulting peroxide number, measured in minutes, estimates the carbons utility in any catalytic application, including chloramine reduction. Based on the comparative results obtained for different mesh size commercial carbons, the efficiency of chloramine reduction is discussed in the terms of peroxide decomposition capacity and further extended to the total life (volume) claims for corresponding GAC carbon. Chemistry of Iron Oxidation. A mineral found in soil, iron normally exists in an insoluble oxide form, namely ferric oxide. If acidic or carbon dioxide containing water passes through the soil, the insoluble ferric oxide is reduced to the very soluble ferrous form. When water is pumped from the ground, oxygen from air enters the water and is available for reaction with the ferrous iron. In the presence of oxygen the ferrous form is eventually oxidized to the insoluble ferric form, resulting in familiar red deposits that stain sinks and clothes. In iron removal processes, the insoluble ferric hydroxide comes out of solution and is separated from the water by either filtration or settling. Catalytic carbon accelerates the reaction rate of ferrous to ferric iron dramatically, completely removing the in the relatively short time the water is in contact with the carbon. Under normal conditions, the reaction rate of ferrous to ferric iron is fairly slow, even when excess oxygen is present. This slow reaction rate necessitates the use of large retention tank and sedimentation tanks to allow time for precipitation to occur. A separate filtration step is then required to remove the remaining particulate. In treating iron-laden water, the catalytic properties of the form of granular activated carbon perform quite differently from standard activated carbon. The catalytic properties greatly accelerates the reaction time of iron to an insoluble form. By oxidizing iron from a soluble to less soluble state, catalytic carbon serves to simplify the removal. The resultant increase in reaction rate that occurs by using catalytic carbon allows smaller pieces of equipment to be used. As with all oxidation techniques, oxygen is required but a simple eductor or air injection pump is all that is required. As the reaction occurs, the precipitate is collected on the surface of the carbon, and a secondary filter is not required. Periodic backwashing is performed to remove this iron floc and return the carbon to a usable state. Another benefit of the catalytic carbon is its proven performance in removing hydrogen sulfide (H2S) from water. Many iron-containing waters also contain H2S and same bed of catalytic carbon can be used to remove both. Similarly, the unique reactive nature of the internal surface of activated carbon means that there is an inherent ability for the promotion of reactions between gases and liquids that would either proceed too slowly or generate uneconomic yields of final product. This is achieved without the need for the addition of a chemical reagent to the activated carbon and often true catalysis proceeds, without degradation of the surface or adsorbent. Whole House Water Filtration. This unit includes the following. 12″x 52″ FRP Mineral Tank (Color Varies). In & Out Valve. 2 CU FT Catalytic Carbon. Good Economical Whole House Catalytic Carbon Water Filter System. Used or installed items are not accepte for return. Titan Water Pro is your “Clean Water Solutions”. Track Page Views With. Auctiva’s FREE Counter. The item “POE Whole House Water Filter 2 CU FT Catalytic Carbon With In & out Valve 1252″ is in sale since Friday, October 18, 2019. This item is in the category “Home & Garden\Kitchen, Dining & Bar\Small Kitchen Appliances\Water Purification\Water Filters”. The seller is “titanwaterpro” and is located in Lancaster, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Viet nam, Uruguay.
- Model: TW2CF
- Custom Bundle: No
- Filtration Method: Carbon/Charcoal
- granular activated carbon: in and out valve
- water filter: water filters
- whole house water filter: gac coconut shell catalytic carbon
- frp mineral tank: CALTYTIC coconut shell carbon
- Type: Water Filter
- Number of Filtrations: 1
- Color: Multicolor
- MPN: TWP1252CATIO
- Brand: Titan Water Pro
- Suitable For: Commercial