Whole House Water Filter And Descaler

Whole House double Action Hard Water Filter. Using our Hard Water Poly Salt-Free Water filter means cleaner, purer and much tastier drinking water. You get two awesome products in one compact filtration system. If you are like most homeowners, you might have several filters, softeners or conditioners installed to perform several tasks including water filtration and hard water treatment/conditioning. This double Action has all of these features built-in and actually performs two separate functions. First of all, it has a built-in cleanable stainless steel 50-micron filter that is easily removed for service as needed. Second, it holds 10.5 ounces of polyphosphate crystals which will keep the aragonite and iron in suspension and helps keep spotting from occurring. Aragonite is a softer form of calcium that will not build-up like untreated limescale, which will eventually damage fixtures, pipes, and appliances. Aragonite will also coat the inside of pipes and tanks adding a layer of anti-corrosive protection. Polyphosphates have been around many years in different applications ranging from municipal water supplies, commercial applications as well as residential applications, all with excellent success. Benefits Of Using The whole house double action hard water filter. Can easily be installed where other filters cannot because of limited space. Combines two levels of conditioning into one compact system. Water Filtration, and Siliphos Treatment. Protects plumbing systems and water-related systems, pipes, and appliances e. Boilers, washing machines, dishwashers, water heaters etc. Will not waste water like conventional water softeners will from backwashing. Environmentally friendly, no wasted brine water. Healthier than conventional salt-based water softeners. Ideal for septic systems because it does not regenerate, or add salt to your septic system. High impact poly filter housing made to last many years and will not rust. 30 GPM high flow design means you will not have decreased water pressure. Easy to disassemble and service. Comes ready to install with a pre-filled polyphosphate. The incoming water goes through siliphos treatment from polyphosphate crystals, to break down the calcium scale into aragonite crystals. The conditioned water passes through the stainless steel 50-micron screen filter. Even though the treated calcium has been converted into aragonite, it is kept in suspension because of the addition of the poly-phosphates. And you maintain the health benefits of having the minerals left in the water. You will enjoy clean and naturally treated water without using salt to treat your water. It is recommended that every six months to check the level of polyphosphate crystals, clean the filter. This may change for your particular application and depends on water usage. The whole house double. Action Hard Water Filter should be installed horizontally. The water inlet and outlet are both 3/4 pipe threads. Install this Hard Water Filter AFTER your pumps pressure tank and do not allow it to freeze. Every 10-12 months, simply unscrew the housing and check the level of polycrystals inside the cannister adding if needed and clean the filter if needed. Maximum pressure 120 PSI. Flow rate 30 GPM. Filtration surface area 340 cm. 9 between water in, and water out ports. Working temperature 120 degrees. Filter weight including 7 oz (185 gr)poly-phosphate crystals 2.5 lbs (750 grams). Includes 7 oz pre-filled polyphosphate cannister. Install the filter in the vertical/horizontal position (recommended right after the water meter) with the direction mentioned (the red arrow). Approximately every 6-8 months, remove the polyphosphate and clean the 50 mic filter at this time if needed using a tooth brush from the inside out. This will usually last for 8-10 months. Shut off the water flow , then open one of your water taps in the house to minimize the water pressure, then Un-screw the filter housing from the water line. Un-screw the two filter halves using the white filter wrench? Please pay attention that the o-ring sitting inside the female half will not fell down. Pull the inner filter screen out , empty the remaining polyphosphate , wash the screen and Re-fill with fresh polyphosphate crystalls. Reinstall the screen filter, then re-install the entire housing again , pls. Notice the o-ring gasket is sitting in it’s right place. Do not over-tighten, hand tighten only. Typical installation >>>>>>> Filter can be installed into any kind of plumbing material including pex, pvc, copper, galvanized and cpvc. Installing a water shut-off on the inlet side or a three-valve by-pass will make servicing faster. The item “WHOLE HOUSE WATER FILTER AND DESCALER” is in sale since Monday, June 17, 2019. This item is in the category “Home & Garden\Home Improvement\Plumbing & Fixtures\Water Filters & Filtration Parts”. The seller is “mikeyanay” and is located in Hadera. This item can be shipped worldwide.

• Type: Water Filter