Tag Archives: 85gac

Big_Big_Whole_House_Filter_Cartridges_4_5x20_Sediment_Carbon_Block_KDF_85_GAC_01_gkd

Big Big Whole House Filter Cartridges 4.5×20 Sediment Carbon Block KDF 85/GAC

Posted on May 22, 2019 Tag by  , , , , , , , , Category in  whole
Big Big Whole House Filter Cartridges 4.5x20 Sediment Carbon Block KDF 85/GAC
Big Big Whole House Filter Cartridges 4.5x20 Sediment Carbon Block KDF 85/GAC
Big Big Whole House Filter Cartridges 4.5x20 Sediment Carbon Block KDF 85/GAC

Big Big Whole House Filter Cartridges 4.5x20 Sediment Carbon Block KDF 85/GAC
Premier 4 Water Filter Cartridge 4.5″x 20″ 2 Sediment 1 KDF85/GAC 1 CARBON BLOCK. 4 WATER FILTERS 4.5″ X 20″ FITS BIG BLUE HIGH CAPACITY WATER FILTER HOUSING. 2 SEDIMENT WATER FILTER CARTRIDGE 4.5 X 20 5 MICRON. 1 CARBON BLOCK WATER FILTER 4.5″ X 20″ 5 MICRON. 1 KDF85 + GAC (granular activated carbon) WATER FILTER CARTRIDGE 4.5″ X 20″. For more information on Big Blue Whole house Filters: PREMIERWATERSYSTEMS. Specifications & Operating Conditions. Maximum Recommended Flow Rate 3 Gallons Per Minute (11 LPM). Range: 40-100°F (4.4 to 37°C). Maximum Recommended Pressure 90 PSI (6.2 bar). Required pH level: 6.5 to 8.5. Recommended Dissolved Oxygen : Iron level in ppm x 0.6. Maximum Recommended Iron Level: 5 ppm (mg/l). KDF 85 Medium Removes or reduces iron and hydrogen sulfide from municipal or other water supplies. Also controls scale, bacteria and algae. Iron / Hydrogen sulfide (Rotten egg smell) reduction filter contains a combination of KDF85 media and coconut shell activated carbon. The KDF85 effectively reduces dissolved iron and hydrogen sulfide odor over a wider pH range than possible with standard oxidation filters such as manganese greensand, thereby protecting your plumbing system including toilets, bath tubs and showers, and appliances such as clothes washers and dishwashers, from unsightly staining and odor. The activated carbon removes organic contaminants to substantially improving water clarity, taste, and odor. It does NOT add any harmful chemicals to the water, making it completely safe for drinking water applications. Fraction of the cost of competitive iron removal systems. Easy to replace cartridge – no media regeneration necessary! NO backwashing required! Effective over a wide pH range of 6.5 to 8.5. Also removes manganese and hydrogen sulfide (rotten egg smell). Does not add harmful bi-products to your drinking water. Prevents staining of laundry and plumbing system including you shower and tub. Will not harm your septic system. Filter features built-in granular activated carbon post-filter for the removal of a wide range of organic contaminants and better tasting water. Filter media inhibits bacteria growth (bacteriostatic). This system should be employed where low to moderate ferrous (dissolved) iron or hydrogen sulfide contamination is known or expected (hydrogen sulfide produces a distinct rotten egg / sulfur odor). This filter is most effective where iron and hydrogen sulfide levels are less than 5 ppm. Best contaminant removal rates are achieved where the pH is between 6.5 and 8.5 and where the water contains some dissolved oxygen. This filter will also remove ferric iron through mechanical filtration, although a sediment filter may be a more cost effective choice. If your pH level is 7.0 or higher, you should consider our PH5 iron / hydrogen sulfide reduction filter which uses a different filter media – the replacement cartridges are significantly cheaper. The life of the filter cartridge depends on the contamination level (iron, manganese and hydrogen sulfide levels) and amount of water consumed on a daily basis. The expected filter life for a typical residential application is about 20,000 gallons (75,500 L). For best results and longest filter-life, a sediment pre-filter is recommended. How it Works: KDF85 media acts as a catalyst to change soluble iron (ferrous) cations into insoluble ferric hydroxide which becomes trapped in the filter. The hydrogen sulfide is converted into an insoluble sulfide precipitate which is then similarly trapped and filtered. Ferric iron is removed by. THESE FILTERS CARTRIDGE FITS 20 BIG BLUE HOUSING. Uncompromising Quality Water Systems. We have years of experience crafting our solutions for specific water sources in California. Our whole house water systems is designed to give you the best water quality from every faucet in your home. Setting ourselves apart from the competition, we use a three stage water system to clean, soften, and purify your water. A whole house filter, softener, and a reverse osmosis system. North Hollywood, CA 91605. Track Page Views With. Auctiva’s FREE Counter. The item “Big Big Whole House Filter Cartridges 4.5×20 Sediment Carbon Block KDF 85/GAC” is in sale since Friday, September 23, 2016. This item is in the category “Home & Garden\Home Improvement\Plumbing & Fixtures\Water Filters”. The seller is “dhillonnoni” and is located in Canyon Country, California. This item can be shipped worldwide.
  • GAC granular activated carbon: 4,5 X 20″
  • Model: PWF42KDF
  • MPN: Does Not Apply
  • Country/Region of Manufacture: United States
  • Filter Type: Carbon Block
  • Brand: Premier Water Systems
  • Type: Water Filter

Big Big Whole House Filter Cartridges 4.5x20 Sediment Carbon Block KDF 85/GAC

Whole House POE Water Filtration KDF 85/GAC treat Iron, Hydrogen Sulfide FT

Posted on April 18, 2018 Tag by  , , , , , , , , Category in  whole
Whole House POE Water Filtration KDF 85/GAC treat Iron, Hydrogen Sulfide FT

Whole House POE Water Filtration KDF 85/GAC treat Iron, Hydrogen Sulfide FT
WHOLE HOUSE WATER FILTERS SYSTEMS KDF85/GAC TIMER BACKWASH VALVE. WHOLE HOUSE MULTI MEDIA WATER SYSTEMS WITH THE FOLLOWING. KDF 85 Medium Removes or reduces iron and hydrogen sulfide from municipal or other water supplies. Also controls scale, bacteria and algae. KDF 55 & KDF 85 process media can remove up to 99% of water soluble lead, mercury, nickel, chromium, chlorine and Hydrogen Sulfide and other dissolved metals. Redox media alloys function as catalysts to change soluble ferrous cations (positively-charged ions) into insoluble ferric hydroxide, which can be removed with regular backwashing. With enough oxygen dissolved in the water, iron removal rates of 98 percent or better are common. You may not even realize that KDF® process media are working for you. KDF media is the core product of many filtration systems, and can be used in conjunction with other products to provide superior purification. Patented KDF process media consist of high-purity copper-zinc formulations. Through this basic chemical process known as redox (oxidation/reduction), KDF process media work behind the scenes to rid your water of chlorine, lead, mercury, iron and hydrogen sulfide. The redox reaction also inhibits the growth of bacteria, algae, and fungi. As an added benefit, KDF media reduce lime scale, mold, and fungi in your tub or shower. KDF process media are completely safe. KDF media meet EPA and Food and Drug Administration standards for levels of zinc and copper in potable water, so the process is not toxic and does not cause any adverse side effects. KDF media are certified by the NSF Standard 61 and Standard 42 Your assurance that they meet public safety standards. KDF media are environmentally sound and 100 percent recyclable, but refer to the instructions enclosed with your filter or system for proper disposal, as different manufacturers combine KDF process media with other filtration technologies. 1.5 CU FT OF GRANULAR ACTIVATED CARBON. Carbon is a substance that has a long history of being used to absorb impurities and is perhaps the most powerful absorbent known to man. One pound of carbon contains a surface area of roughly 125 acres and can absorb literally thousands of different chemicals. Activated carbon which has a slight electro-positive charge added to it, making it even more attractive to chemicals and impurities. As the water passes over the positively charged carbon surface, the negative ions of the of the contaminants are drawn to the surface of the carbon granules. Activated carbon filters used for home water treatment typically contain either granular activated carbon or powdered block carbon. Although both are effective, carbon block filters generally have a higher contaminant removal ratio. The two most important factors affecting the efficiency of activated carbon filtration are the amount of carbon in the unit and the amount of time the contaminant spends in contact with it. The more carbon the better. Similarly, the lower the flow rate of the water, the more time contaminants will be in contact with the carbon, and the more absorption that will take place. Particle size also affects removal rates. The most common carbon types used in water filtration are bituminous, wood, and coconut shell carbons. While coconut shell carbon typically costs 20% more than the others, it is generally regarded as the most effective of the three. All of our activated carbon filters use coconut shell carbon. There are two principal mechanisms by which activated carbon removes contaminants from water; absorption, and catalytic reduction, a process involving the attraction of negatively-charged contaminants ions to the positively-charged activated carbon. Organic compounds are removed by absorption and residual disinfectants such as chlorine and chloramines are removed by catalytic reduction. Activated carbon filtration is very common in a number of home water treatment systems. It can be used as a stand alone filter to reduce or eliminate bad tastes and odors, chlorine, and many organic contaminants in municipal (pre-treated or chlorinated) water supplies to produce a significantly improved drinking water. It is also very commonly used as a pre-treatment as part of a reverse osmosis system to reduce many organic contaminants, chlorine, and other items that could foul the reverse osmosis membrane. 0.5 block filters are commonly used to remove cysts such as giardia and cryptosporidium. Activated carbon filters remove/reduce many volatile organic chemicals (VOC), pesticides and herbicides, as well as chlorine, benzene, trihalomethane (THM) compounds. Whole House Filtration (Point of Entry). This unit includes the following. 10″ x 54″ Mineral Tank (Color Varies). Auto Timer Backwash Control Unit – 110V. Hydrogen sulfide concentrations exceeding 7 to 10 ppm can be removed by injecting an oxidizing chemical such as household bleach followed up by filtration. The oxidizing chemical should enter the water upstream from the storage or mixing tank to provide at least 30-45 minutes of contact time between the chemical and water. The length of length of the holding time is a function of the chemical dosage, tank configuration and water temperature. Sulfur particles can then be removed using a sediment filter and the excess chlorine can be removed by activated carbon filtration. If test results indicate that bacterial contamination is occurring, shock chlorination or disinfection is the most widely suggested method for initial treatment. Shock chlorination (disinfection) is the one-time introduction of a strong solution into the entire water distribution system well, pump, distribution pipeline, etc. When to Shock Disinfect the Well. Shock chlorination (disinfection) is recommended when lab results indicate a presence of bacteria upon completion of a new well or after pump replacement or repair, when the distribution system is opened for repairs or maintenance, following contamination by flood water, to control iron and sulfur bacteria. Shock chlorination (disinfection) is recommended in these circumstances to ensure that bacterial contamination is controlled. This system should be used where low to moderate ferrous (dissolved) iron or hydrogen sulfide contamination is known. This filter is most effective where iron and hydrogen sulfide levels are less then 5 ppm. Best removal rates are achieved where pH is between 6.5 and 8.5 and where water contains some dissolved oxygen. Used or installed items are not accepted for return. Titan Water Pro is your “Clean Water Solutions”. Track Page Views With. Auctiva’s FREE Counter. The item “Whole House POE Water Filtration KDF 85/GAC treat Iron, Hydrogen Sulfide FT” is in sale since Wednesday, June 22, 2016. This item is in the category “Home & Garden\Kitchen, Dining & Bar\Small Kitchen Appliances\Water Filters”. The seller is “titanwaterpro” and is located in Canyon Country, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Type: Whole House Filter System
  • Brand: Titan Water Pro
  • Filtration Method: Carbon/Charcoal
  • Color: Multi-Color
  • Model: TWPROWHKD85
  • MPN: TWP188WHV
  • GAC: KDF85
  • kdf55: gac
  • whole house water filter: home water filter
  • kdf85: iron removal filter
  • well water filter: hydrogen sulfide

Whole House POE Water Filtration KDF 85/GAC treat Iron, Hydrogen Sulfide FT

Whole House Water FiltrationKDF 85/GAC (2 CU Ft) Iron, Hydrogen Sulfide +++

Posted on April 15, 2018 Tag by  , , , , , , , Category in  whole
Whole House Water FiltrationKDF 85/GAC (2 CU Ft) Iron, Hydrogen Sulfide +++

Whole House Water FiltrationKDF 85/GAC (2 CU Ft) Iron, Hydrogen Sulfide +++
WHOLE HOUSE WATER FILTERS SYSTEMS KDF85/GAC TIMER BACKWASH VALVE. Whole-house multi-media water filtration comes with. Removes or reduces iron and hydrogen sulfide from municipal or other water supplies. Also controls scale, bacteria and algae. KDF 55 & KDF 85 process media can remove up to 99% of water soluble lead, mercury, nickel, chromium, chlorine and Hydrogen Sulfide and other dissolved metals. Redox media alloys function as catalysts to change soluble ferrous cations (positively-charged ions) into insoluble ferric hydroxide, which can be removed with regular backwashing. With enough oxygen dissolved in the water, iron removal rates of 98 percent or better are common. You may not even realize that KDF® process media. Are working for you. KDF media is the core product of many filtration systems, and can be used in conjunction with other products to provide superior purification. Patented KDF process media consist of high-purity copper-zinc formulations. Through this basic chemical process known as redox (oxidation/reduction), KDF process media work behind the scenes to rid your water of chlorine, lead, mercury, iron and hydrogen sulfide. The redox reaction also inhibits the growth of bacteria, algae, and fungi. As an added benefit, KDF media reduce lime scale, mold, and fungi in your tub or shower. KDF process media are completely safe. KDF media meet EPA and Food and Drug Administration standards for levels of zinc and copper in potable water, so the process is not toxic and does not cause any adverse side effects. KDF media are certified by the NSF Standard 61 and Standard 42 Your assurance that they meet public safety standards. KDF media are environmentally sound and 100 percent recyclable, but refer to the instructions enclosed with your filter or system for proper disposal, as different manufacturers combine KDF process media with other filtration technologies. 2 CU FT OF GRANULAR ACTIVATED CARBON. Carbon is a substance that has a long history of being used to absorb impurities and is perhaps the most powerful absorbent known to man. One pound of carbon contains a surface area of roughly 125 acres and can absorb literally thousands of different chemicals. Activated carbon which has a slight electro-positive charge added to it, making it even more attractive to chemicals and impurities. As the water passes over the positively charged carbon surface, the negative ions of the of the contaminants are drawn to the surface of the carbon granules. Activated carbon filters used for home water treatment typically contain either granular activated carbon or powdered block carbon. Although both are effective, carbon block filters generally have a higher contaminant removal ratio. The two most important factors affecting the efficiency of activated carbon filtration are the amount of carbon in the unit and the amount of time the contaminant spends in contact with it. The more carbon the better. Similarly, the lower the flow rate of the water, the more time contaminants will be in contact with the carbon, and the more absorption that will take place. Particle size also affects removal rates. The most common carbon types used in water filtration are bituminous, wood, and coconut shell carbons. While coconut shell carbon typically costs 20% more than the others, it is generally regarded as the most effective of the three. All of our activated carbon filters use coconut shell carbon. There are two principal mechanisms by which activated carbon removes contaminants from water; absorption, and catalytic reduction, a process involving the attraction of negatively-charged contaminants ions to the positively-charged activated carbon. Organic compounds are removed by absorption and residual disinfectants such as chlorine and chloramines are removed by catalytic reduction. Activated carbon filtration is very common in a number of home water treatment systems. It can be used as a stand alone filter to reduce or eliminate bad tastes and odors, chlorine, and many organic contaminants in municipal (pre-treated or chlorinated) water supplies to produce a significantly improved drinking water. It is also very commonly used as a pre-treatment as part of a reverse osmosis system to reduce many organic contaminants, chlorine, and other items that could foul the reverse osmosis membrane. 0.5 block filters are commonly used to remove cysts such as giardia and cryptosporidium. Activated carbon filters remove/reduce many volatile organic chemicals (VOC), pesticides and herbicides, as well as chlorine, benzene, trihalomethane (THM) compounds. Whole House Filtration (Point of Entry). This unit includes the following. 12″ x 52″ Mineral Tank (Color Varies). 2 CU FT GAC Carbon. Auto Timer Backwash Control Unit – 110V. Hydrogen sulfide concentrations exceeding 7 to 10 ppm can be removed by injecting an oxidizing chemical such as household bleach followed up by filtration. The oxidizing chemical should enter the water upstream from the storage or mixing tank to provide at least 30-45 minutes of contact time between the chemical and water. The length of length of the holding time is a function of the chemical dosage, tank configuration and water temperature. Sulfur particles can then be removed using a sediment filter and the excess chlorine can be removed by activated carbon filtration. If test results indicate that bacterial contamination is occurring, shock chlorination or disinfection is the most widely suggested method for initial treatment. Shock chlorination (disinfection) is the one-time introduction of a strong solution into the entire water distribution system well, pump, distribution pipeline, etc. When to Shock Disinfect the Well. Shock chlorination (disinfection) is recommended when lab results indicate a presence of bacteria upon completion of a new well or after pump replacement or repair, when the distribution system is opened for repairs or maintenance, following contamination by flood water, to control iron and sulfur bacteria. Shock chlorination (disinfection) is recommended in these circumstances to ensure that bacterial contamination is controlled. This system should be used where low to moderate ferrous (dissolved) iron or hydrogen sulfide contamination is known. This filter is most effective where iron and hydrogen sulfide levels are less then 5 ppm. Best removal rates are achieved where pH is between 6.5 and 8.5 and where water contains some dissolved oxygen. Used or installed items are not accepted for return. About Us: Titan Water Pro is your “Clean Water Solutions” Titan Water Pro 26845 Oak Ave, Ste 2 Santa Clarita, CA 91351 661 388 2004 Hours: 10A-4P (Closed Sat/Sun). Track Page Views With. Auctiva’s FREE Counter. The item “Whole House Water FiltrationKDF 85/GAC (2 CU Ft) Iron, Hydrogen Sulfide +++” is in sale since Friday, June 24, 2016. This item is in the category “Home & Garden\Kitchen, Dining & Bar\Small Kitchen Appliances\Water Filters”. The seller is “titanwaterpro” and is located in Canyon Country, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Type: Whole House Filter System
  • Brand: Titan Water Pro
  • Filtration Method: Carbon/Charcoal
  • Color: Multi-Color
  • Model: TWPROWHKD85
  • MPN: TWP188WHV
  • GAC: KDF85
  • kdf55: gac
  • whole house water filter: home water filter
  • kdf85: iron removal filter
  • well water filter: hydrogen sulfide

Whole House Water FiltrationKDF 85/GAC (2 CU Ft) Iron, Hydrogen Sulfide +++

Department