New #1 Water Softener 48k 5600SXT digital metered on demand whole house filter

New #1 Water Softener 48k 5600SXT digital metered on demand whole house filter

Posted on September 4, 2018 Tag by  , , , , , , , , Category in  water
New #1 Water Softener 48k 5600SXT digital metered on demand whole house filter

New #1 Water Softener 48k 5600SXT digital metered on demand whole house filter
Complete 48k Water Softener with Fleck 5600SXT Metered. Psalm 78:15 He split the rocks in the desert and gave them water as abundant as the seas. 48,000 grain capacity – 1.5 ft. High Capacity resin Digital Metered Fleck 5600SXT Complete system includes separate brine tank. Providing the quality water you deserve at a price you can afford! #1 Rated control valve! Best efficiency, saves salt! Eliminates White Scale Buildup. Easy to install, easy to use! Fleck 5600SXT Digital Control Head. ¾ Bypass Valve included!! (1 available on request). 10″x54″ Structural USA Tank. Standard Square Brine Tank. 48,000 Grain Capacity. ³ High Capacity Resin. Treats up to 12GPM. Fleck 5600SXT Controller SXT smart electronics measure and memorize your water usage patterns to give you the most efficient system on the market! The hard water that causes scale build up and reduces soap efficiency with our complete whole house water softening unit with high efficiency Fleck 5600SXT Digital “On-Demand” control valve. By eliminating hard water you extend the life of your homes plumbing and appliances! Hard water causes a white flaky build up (called scale) to form on appliances, faucets, and just about anything that it comes in regular contact with. By removing the hard water, this scale build up is stopped in it’s tracks, so you don’t have to worry about scrubbing it off any more. In addition, without the added wear and tear of scale buildup, your appliances and fixtures will last longer! The calcium and magnesium ions that comprise hard water attract soap molecules, leaving less soap to do the cleaning. With those ions gone, your soap and detergents can focus entirely on cleaning, meaning less soap will be required once the water has been softened. This system uses a meter based regeneration process. This means that the water you use is measured and the system only regenerates when it needs to. If water needs increase the system regenerates more often to keep up. If less water is being used, the system regenerates less often to conserve water. This provides a system that is much more efficient and eco-friendly than common time based regeneration systems. Fleck 5600SXT Digital Control. The SXT controller is the newest controller from Fleck and is built on the tried and true 5600 valve. In addition, the SXT controller offers some great features, including a backlit LCD display, touchpad controls, 48 hour internal power backup, and a user friendly interface. The included stainless steel bypass valve allows for easy connection of the system and provides a quick and easy means to bypass the system and disconnect the system without needing to cut your plumbing. Design & color may vary from the one shown. The brine tanks stores the salt required for regeneration. The standard square brine tank included with this system is approximately 15″x17″x33 and can hold about 250 lbs. The included safety float prevents overfilling and the overflow drain acts as an additional backup to avoid water messes. We use a high quality high capacity resin in all of our softening systems. This system has a capacity of 48,000 (or 48k) grains, meaning it can remove 48,000 grains of hardness, and can treat a maximum flow rate of 12GPM. More information on capacity, grains of hardness, flow rates, and sizing can be found at right. We provide detailed installation instructions that allow most homeowners to install this system themselves. All it takes is some basic plumbing skills and some common knowledge! If you don’t feel confident installing it yourself most plumbers can install it in about 1-2 hours. What is a water softener? Eventually the media in the softener (called softening resin) has exchanged all of its sodium or potassium ions, at which point it will no longer be able to remove any more water hardness. This is why the system regenerates. During this process the system runs a brine solution (water and either sodium or potassium chloride) backwards through the softening resin. This concentrated solution forces the trapped calcium and magnesium ions off the resin and down the drain, replacing them with the sodium or potassium ions needed for softening. With the Fleck control heads, this process is automatic, and only as needed! What does the grain capacity mean? Water hardness is usually measured in grains per gallon (gpg). Some places use parts per million [ppm] or milligrams per liter [mg/L]. To convert your ppm or mg/L to gpg simply divide by 17.1 [Example – 200ppm or mg/L is equal to 200 / 17.1 = 11.7gpg] The grain capacity of a system is how many grains of hardness your system can remove before it needs regenerated. A 32,000 grain or 32k water softener will remove 32,000 grains of water hardness. From that you can determine how many gallons of water you can go through between regenerations. If you have a 32k softener and your water is 15gpg hard, you can go through 32,000/15=2,133 gallons of water before your softener is exhausted and needs regenerated. What size system do I need? There are 2 main factors in determining the size you need: water usage and water hardness. Here is a general guideline on sizing your system. 1-2 people, average water use and low hardness (under 15gpg). 3-5 people with average water use or moderate hardness (15-45gpg). 5-7 people with average water use or high hardness (45-65gpg). Is the maximum amount of water, in gallons per minute (gpm) that a given system can effectively treat. Always size a system based on water usage first, a system undersized for your water usage may not always filter effectively and will wear out faster. Are there systems that don’t use salt? Yes, we carry a high quality salt free water conditioner that eliminates hard water problems. System utilizes a specialized media to provide the same benefits a standard softener offers without the use of salt. In addition, beneficial minerals are left in the water and existing scale is removed as well! In our experience our systems outperform other salt free units, including the “magnetic” and electric systems that are widely available. Should I be concerned about the salt a water softener puts in my water? The amount of salt put into your water by a water softener is minimal. In fact, in most cases it is low enough that water ran through a softener is still considered “low-sodium” by the FDA. If you want to avoid adding additional sodium to the water all our water softeners can be used with potassium chloride instead of the traditional sodium chloride. If you want to ensure safe drinking water, our drinking water. Can turn your ordinary household water into bottled quality drinking water. What are the differences in the Fleck models 5600, 5600SXT control heads? Is your basic mechanical control valve. It does it’s job in the most cost effective way possible. It is a metered head so it measures how much water you go through and regenerates based water usage. Due to the mechanical limitations on the head it can only be set to 2100 gallons, at that point it has to regenerate, so some efficiency can be lost depending on the system size and your water hardness. This head is ideal if you are looking for the lowest cost option. Works similar to the standard 5600 but uses a digital interface instead of a mechanical one. This makes setup easier, and with the digital control it can be set to go through up to 9,999 gallons of water between regenerations. The 5600SXT can be more efficient that the 5600 because of this, especially in larger homes with lower hardness levels. The other advantage the 5600SXT has is adjustable regeneration cycles, while in most cases these settings won’t need to be adjusted, with the 5600SXT the option is there should you ever need it. What kind of maintenance does this system require? The only regular maintenance a water softener requires is adding salt to the brine tank, and occasionally cleaning the brine tank. 0.8125″ or 1.05″ O. Flow Rates (50psi Inlet) – Valve Alone. 2-1/2 – 8 NPSM. Height From Top of Tank. 6″ – 12″ diameter. 8″ – 10″ diameter. Time clock – 6lbs. Up to 199 minutes per cycle. 0.25 – 15gpm +/- 5%. Hydrostatic: 300psi Working: 20 – 125psi. 1 – 60,000. Maximum flow rate shown is the maximum the valve is capable of, maximum service flow rates will vary depending on system type & size Standard setup is 60Hz, other setups may be available at an additional charge Specs shown are general specifications for the head and some specs may not be applicable, depending on system configuration. The item “New #1 Water Softener 48k 5600SXT digital metered on demand whole house filter” is in sale since Friday, October 10, 2014. This item is in the category “Home & Garden\Home Improvement\Plumbing & Fixtures\Other Home Plumbing & Fixtures”. The seller is “factory_direct_savings” and is located in Pfeifer, Kansas. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Related Retailer: Sears
  • Brand: Abundant Flow Water
  • MPN: Does Not Apply

New #1 Water Softener 48k 5600SXT digital metered on demand whole house filter

Department