Fleck whole house Tannin Removal Filter Water Softener Hi Flow Digital SXT valve

Fleck whole house Tannin Removal Filter Water Softener Hi Flow Digital SXT valve

Posted on July 6, 2018 Tag by  , , , , , , , , , , Category in  fleck
Fleck whole house Tannin Removal Filter Water Softener Hi Flow Digital SXT valve
Fleck whole house Tannin Removal Filter Water Softener Hi Flow Digital SXT valve

Fleck whole house Tannin Removal Filter Water Softener Hi Flow Digital SXT valve
Tannin Pro Water Softener & Tannin Filter. Psalm 78:15 He split the rocks in the desert and gave them water as abundant as the seas. Softens the Water amp; Removes Tannins Digital Fleck 5600SXT Standard 2ft. ³ system includes separate brine tank. Providing the quality water you deserve at a price you can afford! Removes Tannins up to 3ppm. Eliminates Tea Colored Water. Eliminates White Scale Buildup. Fleck 5600SXT Digital Control Head. 12″x48″ Structural USA Tank. Larger Round Brine Tank. 48,000 Grain Capacity. ³ High Capacity Resin. Treats up to 12GPM. The hard water that causes scale build up and tannins that discolor the water with a single system powered by the Fleck 5600SXT digital valve! Usually origninating from decaying organic matter, tannins cause staining and in large doses can be toxic. This system is only capable of removing up 3ppm of tannins, if higher levels are present, a second tannin system will be needed. By eliminating hard water you extend the life of your homes plumbing and appliances! Hard water causes a white flaky build up (called scale) to form on appliances, faucets, and just about anything that it comes in regular contact with. By removing the hard water, this scale build up is stopped in it’s tracks, so you don’t have to worry about scrubbing it off any more. In addition, without the added wear and tear of scale buildup, your appliances and fixtures will last longer! The calcium and magnesium ions that comprise hard water attract soap molecules, leaving less soap to do the cleaning. With those ions gone, your soap and detergents can focus entirely on cleaning, meaning less soap will be required once the water has been softener. This system uses a meter based regeneration process. This means that the water you use is measured and the system only regenerates when it needs to. If water needs increase the system regenerates more often to keep up. If less water is being used, the system regenerates less often to conserve water. This provides a system that is much more efficient and eco-friendly than common time based regeneration systems. Fleck 5600SXT Digital Control. The SXT controller is the newest controller from Fleck and is built on the tried and true 5600 valve. In addition, the SXT controller offers some great features, including a backlit LCD display, touchpad controls, 48 hour internal power backup, and a user friendly interface. The included stainless steel bypass valve allows for easy connection of the system and provides a quick and easy means to bypass the system and disconnect the system without needing to cut your plumbing. Design & color may vary from the one shown. The included brine tank stores the salt required for regeneration. The round brine tank is larger than the standard square brine tank; is approximately 18″Dx40″H, and can hold about 300 lbs. The included safety float prevents overfilling and the overflow drain acts as an additional backup to avoid water messes. The 1.5 ft³ of resin used in this system provides a grain capacity of 48,000 grains. We use a high quality, high capacity resin in all of our softening systems. This high efficiency media is also long lasting, with an average life span of 10-15 years! Our systems use high quality tannin resin. This tannin specific resin allows for removal up to 3ppm. We provide detailed installation instructions that allow most homeowners to install this system themselves. All it takes is some basic plumbing skills and some common knowledge! If you don’t feel confident installing it yourself most plumbers can install it in about 1-2 hours. Approximate level of Tannins. Tannin Level in Parts per Million (ppm). 0.0 – 0.5. Faint tinge of yellow. 0.5 – 2.0. Darker golden yellow (ginger ale). 2.0 – 3.0. 3.0 – 5.0. What is a water softener? The tannin specific resin is able to remove tannins by the same process. Eventually the media in the softener (called softening resin) has exchanged all of its sodium or potassium ions, at which point it will no longer be able to remove any more contaminates. This is why the system regenerates. During this process the system runs a brine solution (water and either sodium or potassium chloride) backwards through the softening resin. This concentrated solution forces the trapped ions off the resin and down the drain, replacing them with the sodium or potassium ions needed for softening. With the Fleck control heads, this process is automatic, and only as needed! What does the grain capacity mean? Water hardness is usually measured in grains per gallon (gpg). Some places use parts per million [ppm] or milligrams per liter [mg/L]. To convert your ppm or mg/L to gpg simply divide by 17.1 [Example – 200ppm or mg/L is equal to 200 / 17.1 = 11.7gpg] The grain capacity of a system is how many grains of hardness your system can remove before it needs regenerated. A 32,000 grain or 32k water softener will remove 32,000 grains of compensated hardness. From that you can determine how many gallons of water you can go through between regenerations. If you have a 32k softener and your water is 20gpg hard, you can go through 32,000/20=1,600 gallons of water before your system is exhausted and needs regenerated. What size system do I need? There are 2 main factors in determining the size you need: water usage and water hardness. Here is a general guideline on sizing your system. 1-2 people, low water use and low hardness (under 15gpg). 2-4 people with average water use and moderate hardness (15-35gpg). Always size a system based on water usage first, a system under sized for your water usage may not always filter effectively and will wear out faster. Are there systems that don’t use salt? Yes, we have a system that eliminates hard water problems without the use of salt, and there are filter cartridges available that remove tannins, however, the Tannin Pro system is the only system we carry that treats both. For salt free water conditioning, our Scale Sentry system utilizes a specialized media to provide the same benefits a standard softener offers without the use of salt. In addition, beneficial minerals are left in the water and existing scale is removed as well! Should I be concerned about the salt a water softener puts in my water? The amount of salt put into your water by a water softener is minimal. In fact, in most cases it is low enough that water ran through a softener is still considered “low-sodium” by the FDA. If you want to avoid adding additional sodium to the water all our water softeners can be used with potassium chloride instead of the traditional sodium chloride. If you want to safe drinking water, our drinking water RO Systems can turn your ordinary household water into bottled quality drinking water. What are the differences in the Fleck models 5600 and 5600SXT control heads? Is your basic mechanical control valve. It does it’s job in the most cost effective way possible. It is a metered head so it measures how much water you go through and regenerates based water usage. Due to the mechanical limitations on the head it can only be set to 2100 gallons, at that point it has to regenerate, so some efficiency can be lost depending on the system size and your water hardness. This head is ideal if you are looking for the lowest cost option. Works similar to the standard 5600 but uses a digital interface instead of a mechanical one. This makes setup easier, and with the digital control it can be set to go through up to 9,999 gallons of water between regenerations. The 5600SXT can be more efficient that the 5600 because of this, especially in larger homes with lower hardness levels. The other advantage the 5600SXT has is adjustable regeneration cycles, while in most cases these settings won’t need to be adjusted, with the 5600SXT the option is there should you ever need it. What kind of maintenance does this system require? The only regular maintenance a water softener requires is adding salt to the brine tank, and occasionally cleaning the brine tank. 0.8125″ or 1.05″ O. Flow Rates (50psi Inlet) – Valve Alone. 2-1/2 – 8 NPSM. Height From Top of Tank. 6″ – 12″ diameter. 8″ – 10″ diameter. Time clock – 6lbs. Up to 199 minutes per cycle. 0.25 – 15gpm +/- 5%. Hydrostatic: 300psi Working: 20 – 125psi. 1 – 60,000. Maximum flow rate shown is the maximum the valve is capable of, maximum service flow rates will vary depending on system type & size Standard setup is 60Hz, other setups may be available at an additional charge Specs shown are general specifications for the head and some specs may not be applicable, depending on system configuration. The item “Fleck whole house Tannin Removal Filter Water Softener Hi Flow Digital SXT valve” is in sale since Friday, September 4, 2009. This item is in the category “Home & Garden\Home Improvement\Plumbing & Fixtures\Other Home Plumbing & Fixtures”. The seller is “cleandrink” and is located in Pfeifer, Kansas. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Colombia, Panama, Jamaica.
  • Brand: afwfilters
  • MPN: Does Not Apply

Fleck whole house Tannin Removal Filter Water Softener Hi Flow Digital SXT valve

Department